开云体育

Hi All: If you head over to the Azur Electronics Website, at: http://azurelectronics.com/Tektronix%20Type%20184%20Time%20Mark%20Genera.htm You can see where he is replacing the Tektronix male plug, on

Bruce, I have a similar counter, but with LCD instead of LED display. The firmware automatically adjusts for the divide-by-64 prescaler and displays the actual input frequency. It also has

Hi Dave, Don't get your panties in a bunch :) We are incredibly fortunate to have our own staggering reference library - TekWiki. An encyclopedia can give provide you with a staggering amount

Dennis,It only takes less than 10 minutes and I get a cord that is the exact length I need and another extension cord, always have need of extension cords. Plus the cords are a smaller gauge and

Ditto- my 4041 has been languishing in the corner for some years now. DaveB, NZ

Say what?????? I thought that was TEKSCOPES .............it even had the answer to check out TekWiki!!!! And your the moderator! :)

Yrs Dennis. I browsed it and it is amazingly thorough. Good reference. Thanks a bunch In matters of style, float with the current. In matters of Principle, stand like a rock. “. — Thomas

Please let me know if you ever manage to copy the tape for the 4041. My tape has become flaky over the past 40 years. I would be willing to pay for a working copy of the tape. Gary Bosworth --

After acquiring a TR-503 tracking generator for my 492 spectrum analyzer, I was on the lookout for a DC508A counter with the proper option as an add-on. But in time I realized I have several counters

[email protected], hp9845.net and other places have lots of info about these drives and tapes. The tapes tend to physically lose their coating and the polyurethane drive capstans crumble or become

Hi Monty, There might be a few causes for this. The tape heads should be cleaned since that's the easiest thing to try. I am not familiar if demagnetizing them is also appropriate on occasion. The

Hi James- I've had a 1401A for a long time and like it. Small, portable, battery option and while it mates up just right with a 323/etc, you can use it with any scope that has good X-Y capability.

Hi Raymond, To paraphrase Douglas Adams (author of The Hitchhikers Guide to the Galaxy) "If you want to survive out here, you've got to know where TekWiki is at all times". It has the answer to

Hi Leon, This sounds like a much more expensive and more time consuming solution than buying an Air Conditioner extension cord. You should try the simple solution the next time. I think you find it

Dave, I just got one of my Tektronix 4041 computers working this morning. I have a System Verification tape - that boots, but has a program error trying to load the terminal console program. I've

Rolling your own is a feasible, and very rewarding exercise. https://www.qsl.net/n9zia/wireless/pdf/9808035.pdf https://www.qsl.net/n9zia/wireless/pdf/9809037.pdf WA7MLH's modifications to this

They're a lot less pricey if you buy them at a flea market and they don't work.? Of course, that's not going to happen a second time, at least not to me.?? Mine has a problem in the regulator, and

I second Sean.? ?My rule of thumb is "Tek for time domain and HP for frequency domain."? Best of both worlds!? I don't care for Tek spectrum analyzers or HP scopes (although I do own one of the

Speaking as someone who is not the biggest fan of Tektronix SAs despite having a serious addiction to Tek CROs, you could consider going the boat anchor route and get something like an HP 8568B. Yes,

Does anyone have any experience with this BNC? Pressure fit connectors are normal for 75 ohm, this is for 50 ohm https://catalog.belden.com//prodimgs/AllAssets-approved/EN/87/63/198763.pdf Please