开云体育

I found it here: https://github.com/Tek-User

Hi all, Somewhat off topic power supply related. I got some MoVs from aliexpress which I ordered to use in series to protect a 277VAC, 90mA mains supply from high transients. They ought to be a pair

I looked at a couple of 874 s just now. The tips of the small center contacts are pointed and slightly tapered toward the center. The larger of the center contacts are tapered toward the inside

I don't see any bending. What I see are the sharp edges have been chamfered which makes it easy to mate with another GR874 connector. All my GR874 connectors look the same.

Hi Roy These are hermaphrodite connectors and the picture that you refer to does not appear damaged. 73 George G6HIG On Tuesday, August 6, 2019, 10:44:41 PM GMT+1, Roy Thistle

Hi All: Apologies, if this has been covered (there are a lot of posts on 874!).. but the picture on Tekwiki of the GR-874 (the one with the plug facing the viewer... so you can see into it)… well

I suppose no connectors as they were on the PCB. I am interested but without the male connector it is kind of pointless for what I want. John VK2DLP

Oops. The search term I mention should be: "Github Tek-user" Sorry!

I have uploaded to Github a few different repositories under the user name "Tek-User". You can use google for "github two-user". There are 4 project repositories. One on writing new software for

Yea, get one for me! Kevin

Can you point me to the place where you talk about it? Thank you! Tony

Yes, couple screws makes it easy! That is what I did with my scope.

This was 45 years ago, on an Army base where the newer part of the base had enough steam for all of the buildings. I was in a drafty, WWI building that had been a Barracks, Mess hall and steam plant

There goes my resale value.? I put about $300 into acquiring and fixing a pair of them a few years ago, and still have them.? One is my daily driver, the other excess to my needs.? And I'm just as

That looks pretty good.? I see there is more than one.? Perhaps I can convince you to buy one for me.? I don't know about shipping, although I will be in Santa Barbara on Saturday at a

Is this a valid or good deal? I might try and get one if it is. Currently I do not have any digital scopes and would like to try one out. I don't actually need it so it would be more for the learning

Harvey, Did you get s chance to compare my Simulator Voltages with your Simulator Voltages yet? JR

That worked and I have the LVPS boards out now. Unfortunately, I can't isolate by sight or smell where the burning odor came from. I see where there are a few RIFA caps that might be suspect but,

yes and I have a copy, see attached. I do not have a need for it on a scope but it looked like it might work for a pin vise too! nor do I recall who supplied the info....however it is

Chuck I have created an update to my 2465 project with your quotes, ...thanks for all the useful info. https://cdn.hackaday.io/files/1638907011869760/2445-2465%20Fan%20Collet.jpg