开云体育

I liked the idea of using inertia so I made a mouse trap into a pin debris remover. The P6202 socket is going into the hole I am

I've added another pic of the tip with the socket now removed. /g/TekScopes/photo/89499/0?p=Created,,,20,2,0,0 Keystone makes similar sockets. 0.032" seems to be a popular size.

I have no affiliation with the seller: https://baltimore.craigslist.org/ele/d/severna-park-tektronix-curve-tracer-577/6866756926.html Wish I had room (and the $) to add it to my shack... Mike

Thanks for the link Siggi. George- looks like the tip (point) base was left in the hole? Is the tip rear intact when it was removed? or did probe arrive in this condition? I see a few options,?

And for the advice about adding links!

Wow! Good ideas! Thank you for the thoughts Harvey! Will report back.

Go to the picture you've posted, open it in your browser. In the address field of the browser window (which changes to where you are), select and highlight the complete address. Go back to your

Hi Nenad, Your photo reminded me of a modification I made in my 7S12. See here and surrounding messages: /g/TekScopes/message/96331 I'm not sure your "morse code" problem is related

Here's a link to the album: /g/TekScopes/album?id=89499.

I have added three more close ups of the tip socket in the Photos folder here at TekScopes named "Tektronix P6202 FET voltage probe tip problem " Someone asked me in an email if I could put a link. I

Well, The copy I ordered did actually arrive in the UK today, clearly not the one in the photo but nice condition albeit without the dust jacket. It's the 3rd printing 1966 and, from writing on the

Speaking of basement shops- last summer I went to a local garage sale in a house that was built around the turn of the (last) century.? It had lots of "old house weirdness", but the strangest thing

You are in luck :) I have a 7T11 spares mule with the main timing knob intact - it is yours for the cost of postage. Would you like me to check out the cost of postage from UK to US? David

The SKU is sufficient. https://www.newark.com/tektronix/013010708/hook-tip-retractable-black/dp/92B2441?ost=013010708&ddkey=https%3Aen-US%2FElement14_US%2Fsearch

Hi David I think its only if you wish to upload---not download. Hardy -----Oprindelig meddelelse----- Fra: [email protected] [mailto:[email protected]] P? vegne af David C. Partridge Sendt: 14.

Hi Russ, What is your post referring to? It is very frustrating to have to guess. Dennis Tillman W7PF

Hi Roy, What site is being referred to? It makes it much easier if we don't have to guess what your reply refers to. By now there have been at least 50+ posts on this topic. PLEASE include some

...sorry for the way that came through [or didn't]...I had attempted to include a link to Newark's page, but perhaps sku number will be enough to get you to the correct page... Vern.

Looks like Newark sells them, though likely a bit pricier than epay:? 013010708 - Test Accessory, Retractable Hook Tip | | | | | | | | | | | 013010708 - Test Accessory, Retractable Hook

Hi Chuck, That is going to be a long shot. Try Sphere Research and vintageTEK. https://www.sphere.bc.ca/test/index.html https://vintagetek.org/ Dennis Tillman W7PF