开云体育

Beamfinder is working properly. When pressed, the display compresses to a single position on the x-axis, but the amplitude remains. Here is a helpful hint...I pulled (disconnected) the upper and lower

Hello, Matt-- As a guess... VER2 = version 2 73-- Brad AA1IP

I has a TDS540, scussefully repaired. But, few interessing notice: ACQ-Board has a masked programmed ?C from Motorola. it is writed from Motorola with "prototype" 2x Serial-Label : B010197 and VER2.

Hi all?I for one have more scopes than i can or will ever use , but for some strange reason i keep getting them . For me it just fixing them that i enjoy and once fixed it goes in the pile that i

How?

Most men will know that is a question best not asked. My scopes: 2232, 2246 2445, 2465 7704, 7844, 7854, 7904 TDS210

John: I received the viewing hood today. Looks great. Thank you. I will send a check off to you today December 8 2018. Gary

Hi Bob??Thanks for your reply that you sent to me with pictures I would like to ask you if you could possibly let me know the gauge of the wires there and the possible length of the cord coming from

I'd say you've found the best source already. A lot of us use our scopes on the bench, and take the probe pouches off so we can stack things on top of the scope. So, post your requirements here.

My experience with failing capacitor is the strong smell of raw fish. Sometimes I can smell it as soon as the unit arrives or definitely during case removal. I don’t think I’ve noticed a

Mine actually has 3 in that position - I had assumed that was their purpose - thanks for the warning, though. Dave

Yes, that may work with the application of some self-adhesive Velcro. Dave

If there were an included thread to even SKIM 8^( -- Dave Manuals@... www.ArtekManuals.com

Thanks Dave. I suspected that a bad NVRAM will let the scope at least get as far as the DPO splash screen. I guess I have a deeper problem. Can anybody else suggest where I should look?

(No, he didn’t. That’s what you get for replying after just skimming a thread. Promise to better myself.) Grü?e, Carsten

Old devices often have a characteristic smell, e.g., from the dust that is being cooked inside the device. Some of this smell unfortunately stems from leaking capacitors. Is there a guide somewhere

How about heavy duty, large Zip Lock bags ? 73, Dick, W1KSZ

Well he did give it away, no? Grü?e, Carsten

The zipper bags packed with Shure Microphones - sm58 and others? 73, Bill, WA2DVU Cape May, NJ

Depends on the response of the scope you are adjusting. 1GHz at 350ps rise is as far as I go without sampling plugins, so a couple of transient wobbles at ~15GHz at 3% p-p really doesn't matter. So