开云体育

Hi Oliver, It appears that the 371A will accept one adapter. The 371A is designed with Kelvin connectors for the three transistor leads so it has 6 banana sockets in all. The adapters for the 575 are

Here is the November 1988 revision of the Mechanical parts catalog: https://drive.google.com/open?id=1e4b89VK4YtfrCkgxlx7cIwww2VA9vKCI

I am not sure why i am asking , the tek 371a curve tracer , dose it need the test unit or can you use the same adapter that the 576 uses . Is there something special about test rig or just a clean way

Pete and Kurt - Thank you both for the parts catalogs. Prior to those posts all that I had was the Oct-1982 semiconductors catalog and the knobs section of the mechanical catalog. Your posts will be a

Hello Mark, Thousand apologies... I went through the past message replying to one thing you said, but thinking you said something else. What I meant (about checking whether it was a Tek original

i checked Q1484 it is origanal 151-0136-00 is on the trans.i dont have the capability to inject a 30khz signal into hv transformer.besides it is not going neg or starting to run with it out.forgetting

Thank you Pete and Kurt!!! Vince. -- Michigan VHF Corp. http://www.nobucks.net/ http://www.CDupe.com/ http://www.metalworkingfun.com

Thanks very much indeed - very useful when needed

Try http://w140.com/tek_common_design_parts_mechanical_catalog_2_june_1983_ocr.pdf

I can't get to proxy.w140.com as the ISP blocks my VPN provider. Could you provide another DL location please. Thanks David

Thank you Kurt and Pete! I fretted that I had somehow missed #2, but now it has shown up. These are excellent scans of excellent information! tom jobe...

This scan was made possible by Pete Lancashire. http://proxy.w140.com/tek_common_design_parts_mechanical_catalog_2_june_1983_ocr.pdf

Thanks but priced way too high and too much negative feedback for me

The gems keep coming! My thanks to all concerned who are making this superb reference library available - hats off! Craig

This scan was made possible by Pete Lancashire. https://drive.google.com/file/d/1-L1Drv3ngM155xvZEB-7XhTVQGGjRjcu/view?usp=sharing

Hello Mark, Regarding Q1484, besides meter check, what is it actually / what's marked on it? I ask because if this 464 has ever been attempted repair, and if this transistor has been replaced (I.e. by

first thank you for your your help Fabio. i did everything you sugested.she's stuck.i replaced c1487,no change.i checked q1484 out of circuit with my fet analouge meter.checks good,no e to c leakage.i

Have one on ebay https://m.ebay.com/itm/TEKTRONIX-120-1087-00-Used-Cleaned-Tested-2-year-warranty-/311842448381?_mwBanner=1&_rdt=1

Kurt & Pete, Thank you so much. It takes a village to keep old Tektronix CRT stuff alive. Glad to warm myself by this village fire. Kindest regards, George

I am offering these to the members first before Ebay. I am parting out three 475's so have three good CRT's for offer have tested them all come on have a trace and trace moves with vert. and