开云体育

Hi Shaun, Thank you; your pics are helpful, of course. My motors looks a bit different but it seems the bushings assemblies are similar. How did you remove the metal end cap / retainer? Best regards,

Thanks, Dennis. DaveD

FWIW, I receive the list via regular e-mail using Thunderbird and have not been getting duplicates since the move. In the past I was getting duplicates from some Yahoo groups for a time. I think not

I also get dupes of my own messages. I’m using Google mail service, and I suspect this is a gmail artifact due to how it keeps copies of sent mail. wrote:

Sebastian, I disassembled and rebuilt (new bushings, check shaft diameter and wear, balance blade assy, etc) the fan motor in my Tek 556 which includes many images of the motor:

I use the Thunderbird email client under windows.? I only see the email bounced back from groups.io in my Inbox. There is a copy of my original message in the Sent items box.? There must be another

Hi there, In this corner, just proceeding to clean some 500-series scopes' fan motors. There is very good advice in the list's archives, particularly from Stan Griffiths. My question: What is a

Spoke too soon... there was one on FleaBay, shipped for $32. Pounced on that, like a duck on a June bug! Phil

Well, during the reconnoitering to figure out where the black wire would be reconnected... the already too short red (actually, orange) wire broke yet again!? Now, it is too short to solder to. Why

Reed, Thanks for the input. Matt

It's odd. I'm on a number of groups.io lists and the only time I've ever seen a dupe was when someone resent their own message. But on every one of those lists there are a few people that have

Hi Matt: I removed two of the screws on the power transformer on my 575 and put two 3AG fuse holders, one on the side of the transformer and, the second on the front of the transformer. Slightly

When you reply to the groups from your email provider for instance yahoo.com, rather than at the groups.io website, Yahoo (or whatever you use) records the message you sent, but groups.io also sends

I have contacted Tech Support to find out the cause and how to stop this if possible. Dennis Tillman W7PF

Interestingly, I needed C-clip pliars, too, to remove the armature from the fan motor in my 453... bought a Craftsman that had a bag of different size pins. Worked a charm. Phil

Greetings, Allow me to suggest www.mcmaster.com<http://www.mcmaster.com> (McMaster Carr). They offer a variety of sizes under “snap ring pliers” and “fixed tip retaining ring pliers”

Thank you, Dave and Robin for your input.??? I will check it out. Phil

See? What's going on?

Why are my posts coming through twice? Does anyone know? This seems to have started happening recently although I have changed nothing wrt my email client set-up. DaveD

Excellent. Enjoy. Dave