开云体育

If the totalizer runs OK you should have input pulses getting through to the counter chain. Have you checked S160 which selects internal / external clocks? If external is selected that could explain

Sorry. I forgot that. http://www.hamrick.com/

Cool. I'll try out the microfiche scanner with the free trial and see if it solves my problems. Dave Casey

Wow, I have that exact same scanner! I thought it was just dead, just haven't gotten around to gutting it yet. Do you think I should try and use it?

It's Vuescan by Ed Hamrick: https://www.hamrick.com/ Tom

Sounds interesting. Link? Dave Casey merchison@...> wrote:

Chuck, Thanks again for your attention to this issue. But wanted to advise that I did get thru the cal2 process and now the 2467B is error free. I did have to make some adjustments from the PG506 to

This guy sells drivers for many types of scanners including obsolete scanners at a very reasonable price. I have an UMAX Astra 1200S scanner and his driver works great with it. Not only that but the

One very useful doc to scan could well be the 119 page RPR dated December 01, 1997 (or later if available) which shows what parts were used where. Tells you from the part number which instruments it

Chase the input signal path. Sounds like your input isn't making it all the way to the counting circuit. Dave Casey [email protected]> wrote:

The totalizer runs and all digits are displayed. No counting light at all in frequency mode, the counting light in period flashes but no count is displayed. Checked 5V and -12.5V both good.

Hi Dave, As the speaker says in the video clip there is no intention of copying all of the ~3 million microfiche. Instead the scanner would give the museum the ability to: 1) provide scans for

If you go to the donate page at: https://www.youcaring.com/vintagetekmuseum-1085244 you will see that the goal is $6000. Current donations are at $1230. The video apparently shows them testing the

This 'reply' was sent via groups.io web interface. Click on the speech bubble (top left of the message body entry box) to quote

Hi Dave, Here you go: https://vintagetek.org/vintagetek-microfiche-scanner-fundraiser for more information or visit our YouCaring fundraiser site at www.youcaring.com/Vintagetek-fiche

Tom , Dave , Dennis et all Thanks ...OK what I did not hear in the video ( maybe I missed it ... my hearing is even worse than my eyesight at 70)? was the cost of the scanner the museum wants to

The only thing I have seen groups.io autotrim is the garbage below the line of "============" You know, the administrative stuff about unsubscribing, etc.. When you post by email, as you, and I, and

Dennis T Is what Chuck says true? I thought that early on the Groups IO did not trim all posts automatically , and I assumed that we had the option and that the moderators at some point SET the web

https://youtu.be/AToH0P9D2IE

Having looked into it cursorily, using the email headers I receive, most of the posts without quoted text are coming directly from the groups.io website. Others have told me that there is no way