开云体育

I have no affiliation with the seller. http://sfbay.craigslist.org/pen/ele/3611350951.html What model is it? -Kurt

Agreed - Fire Hazzard.

Hi, I admire your work. Did you use the A.G. Schaeffer panel maker? Jerry Massengale

Hi, I recently used Alberts load value to build a load for 3 7704a power supplies that were not working. I added a 3k load for the hv drive lines. I found that one of the power supplies would not

You will need to buil

Funny - i reversed engineered the bootloader API during the last days, without knowing that you did the same half a year ago :) I posted my program + description in the tek forum, look here for the

Hi Charlie, In addition also have a look in the thread of message #83499. Albert

Yes it was discussed. Do a search for the word "gizmo" One of the group's members, Reed Dickenson, designed and manufactures it. Jay

Hi Charlie, You may check 7k_PS_currents .pdf<http://f1.grp.yahoofs.com/v1/gPYZUf81_Z0I_1yWqAuyB5_FeP7zdd31B5Bhir5LAko3yV9sCSa6zMF3HqA2bUDFRqDfe6zBwKFix5gugGOSe3OOCCkN-dRPbCN4/7k_PS_currents%20.pdf>

I designed and built the Pyramid Generator (PG) to be a durable, portable, well constructed device that would pass the test of time. I personally detest cheap made items in flimsy plastic boxes that

Without opening one up, I believe the shaft just snaps on over the switch. Get a small flat blade screwdriver (1 mm tip) and pry the shaft apart. That's from (old) memory so do a reality check first.

Maybe the question should be: if you buy the scope and it turns out either the CRT or hybrid is the problem are they available and if so is the scope worth the extra expense - will you still be ahead.

Hello to the group, I have been thinking about building a DC load box for use in troubleshooting the switchmode power supplies in the Tektronix 2465B and 7000 series scopes that I own. All of my

I have a 2213 with a main power switch that gets mechanically jammed in the on position. I think it is just wear between the plastic and the metal bail inside the switch actuator. I tried a tiny

I have two DAS 9200 "Programmatic Command language " manuals 070-5960-06, free for postage , boxed they weigh close to 5lbs each...USPS Media Mail rate would run you $5 First come first served Dave

Well since the commercial item, very pretty, is fairly expensive, maybe $25 plus postage would be about right. Bob

$1 each and you ship !!!! Seriously though, put a price on them and let folks decide if it's OK or too much. 73, Dick, W1KSZ

Hi,Ray: you gotta delete the comma after .org .Must have a space there! good luck, Al d.

I have several of those Tek evaluation boards.? Put in a 9V battery and you are set to go.? Manual available on line.? Make offer. Bob

Got it. I found the thread. See the TekScopes thread entitled "Scope Tester on Ebay" (around 12/22). Reed Dickinson sent an email owning up to being the designer and seller of these. Cheers, Dave