Re: Bias batteries in 7S14
The 7S14 batteries have a voltage of 1.35 volts, New silver oxide
batteries are about 1.55 volts. You can replace these mercury types
safely with silver oxide types in a 7S14. I have done this about
By
pe1fbo <sh331182@...>
·
#7084
·
|
Re: TEK 2753P Scare
It is both a massive relief and deeply worrying when this sort of thing
happens. My 7L5 has got a similar quirk - the spectrum will shoot off
800kHz up the display from the reference dot - and then
By
Craig Sawyers <c.sawyers@...>
·
#7083
·
|
Re: TEK 2753P Scare
Why would you assume that? This failure wouldn't have anything to do with
the front end. It sounds like a CPU glitch of some sort. The problem's not
likely to be gone forever, but not likely to
By
John Miles <jmiles@...>
·
#7082
·
|
GR on eBay
Here's another piece of early GR stuff I saw on eBay just now - item
3801842023. This is an 804C UHF signal generator. Looks like it is 1940's
(it certainly predates the 1956 catalog that I
By
Craig Sawyers <c.sawyers@...>
·
#7081
·
|
TEK 2753P Scare
My 2753P Spectrum analyzer gave me the scare of my life.
I had not used the unit in about a month, but tonight I built
a filter and I had to see the response. I have a TR503
Tracking generator and
By
xaos <xaos@...>
·
#7080
·
|
Re: Your document (Public Humiliation)
I'm at the $2 windows saying it doesn't last 3..
Regards,
don f.
KR4XH
By
don falconer <mail@...>
·
#7079
·
|
Re: Is it advisable to turn intensity down when scope is idle (but displaying a signal) to preserve CRT?
I generally turn down the intensity quite a bit when not viewing the trace. I watch for that on some of the older tube scopes..because if stops sweeping trace could end up as a dot.
Mark Anton,
By
Mark Anton
·
#7078
·
|
Re: Your document (Public Humiliation)
Grobbins got a virus!
Grobbins got a virus!
Neener, neener, neener!
Well, it is about time for a little public humiliation of the "no-
clues" that click on an attachment.
Unfortunately, Grobbins has
By
Howard Matthews
·
#7077
·
|
Re: 475A filter, protective cap availability?
I think i might have mentioned before on this list, an item that works well for a screen filter is lighting gel material. You can pick the color....use one that is close to the color of the trace.
By
Mark Anton
·
#7076
·
|
Re: Your document
Please have a look at the attached file.
By
Daveolla
·
#7075
·
|
Re: Coax for Calibration Instruments
RG8/U is still alive at Belden in the form 'RG8A/U Type', but being
referenced to MIL-C-17D can not be too far off. At the first glance, RG213U
appears to be similar, but there must be some minor
By
Miroslav Pokorni
·
#7074
·
|
Found Tek 570 at a VoTech college.......
But it will have to be surplused first before I can even have a shot
at it. Surplused to me means big black hole. Damn.
By
K4MPM
·
#7073
·
|
Re: Bias batteries in 7S14
Ask NR1DX, He Often Has The Disc On His E-Bay Auction. Just Search By Single Seller, And Enter NR1DX. Has Quality Scans Available.
Greyhawk
By
Greyhawk <greyhawkeng@...>
·
#7072
·
|
Re: Bias batteries in 7S14
The only kind of mercury cells I can find can be seen at
http://www.px625.com/px625/main.cgi
I have ordered cells from here before for my older Rollei SLR light meter. The cells I received appeared
By
Dan Kerl
·
#7070
·
|
Re: Bias batteries in 7S14
I have two of these units. One has a bad battery
but the other one is still working fine after 25 years!
Dennis
By
Dennis Tillman <Dennis@...>
·
#7069
·
|
Re: Coax for Calibration Instruments
Hi Bill,
I generally use just about any random piece of RG58 that is 2-6 feet long
for these applications. It really does not seem to make a lot of
difference. It will make more difference when you
By
Stan & Patricia Griffiths <w7ni@...>
·
#7071
·
|
Re: Bias batteries in 7S14
Yes.
newell
By
Scott Newell <newell@...>
·
#7068
·
|
Re: Bias batteries in 7S14
Does anyone have a digitized manual...?
By
Michael Dunn <mdunn@...>
·
#7067
·
|
Re: Bias batteries in 7S14
Funny, I was going to ask if there were any symptoms of weak cells.
Anything to watch out for?
newell
By
Scott Newell <newell@...>
·
#7066
·
|
Bias batteries in 7S14
Howdy all-
With all the talk of TEK samplers and the mention of the 7S14, I
wonder what are we 7S14 owners to do these days when it comes to
replacing the bias batteries in the 7S14?
I gather
By
vollumscope <[email protected]>
·
#7065
·
|