开云体育

Thank You for the kind words Mike, most appreciated. Please note that I had to come up with something clever to fix my bone headed first act. It's amazing how creative one can be when you have limited

Hello, Here is a question for the group as well, I and a friend are working on getting a 2712 running... Just finished doing the relay exercise for all relays in the 2712... The issue of failing

Looking for .pdf's of SAUGAMO Silver Mica dipped molded Capacitor data sheets or Catalogs ? -- red rubber type dipped silver mica ) capacitors, with P/N's, specifications. ( Red

Hi all.... The MB connector is a reverse gender connector. The panel mounted one usually has a male pin in the center while the cable mounted one has a female pin with a long teflon insulator around

What's this steel barrel connector thingy? A filter ? Just a support? /g/TekScopes/photo/270729/3783154

If you have a wide tip, depending on what you are desoldering, that works well.? You do have to be rather quick once the solder wicks into the braid. Definitely second the saturate it with braid,

An upvote for Paul Amaranth's mention of Chip Qwik. https://www.digikey.com/en/products/detail/chip-quik-inc/REMKIT/12352150 This is a low temperature alloy that can be added to existing solder

I have found solder wick poorly lacking in rosin content. When using I will saturate it with liquid rosin making the ability to draw out solder significantly better. Greg

You might try this: http://www.automaticconnector.com/descriptions/Submin.html Back in the 70’s I received an Ampex 24 channel instrumentation recorder in a 7 foot rack from NASA where all of the

The ones I purchased from Fair Radio were "cut offs", but were easily be reworked to whatever was required: For example converting the S-52 pre-trigger output to BNC or SMA. I originally bought them

Very clever Gordon. I wouldn't have had the presence of mind to reason through to that solution after discovering said assembly error. Kudos. Mike

Those are on the front of the 7D14 for the Reference Frequency connection and, yes, the MB connector from an R390A will fit it. Barry - N4BUQ

Richard, I just checked my? TG501 trigger and it is an MB 2 lug connector( FYI there are 2 and 3 lug versions). This is the same connector that is used on R390A Radio. Renée

The trick here is to provide a large amount of heat to a very small area in a short amount of time so that the heat does not have time to spread. Way back in the day I bought a wonderful Nixie tube

Thank you Jaap and Jon, Excellent troubleshooting advice! Looking at suspect parts the one I think maybe a bit difficult to source is the CR130, which is a Tek manufactured Schottky diode quad p/n

Hi, maybe this link is helpful for identifying the knobs based on images. https://www.qservice.tv/tek_spares8.htm Best regards

I find the following technique (from youtube) useful: 1. First add new solder to old joint and straighten all curve pins 2. Clean up (use sucker or desoldering gun) to clean up old solder as much as

A 'real' BSM plug looks like this: https://w140.com/tekwiki/wiki/BSM_connector#/media/File:012-0127-00_3.jpg Back in 2020 I posted some photos of a hack BSM plug I'd made using BNC

Bumping this, I need the space back soon. I will probably list them on Craigslist for $100 each? I'm located in Southern Arizona. If anyone is interested in them, or has any ideas on how to better

Thanks all. I found this message: /g/TekScopes/topic/465_electrolytic_capacitor/82404041?p=,,,20,0,0,0::recentpostdate%2Fsticky,,posterid_91206,20,2,0,82404041 I was using a manual