开云体育

You mean other auction sites?? Not any that have a lot of traffic.? There is a auction house near me that used to do sealed bids on everything. (mostly electronic gear and scrap from local

And, finally, here is the solution to the missing readout in SCOPE mode and the acquisition warning which were tied to the same cause. I am documenting some insights for posterity and for the benefit

While it hasn't happened to me in a long time, there is nothing more fun than watching two or three of those morons bidding on something you're selling!? There was even an occasion when I bunch of

Because of these ridiculous and outrageous prices, is there a modern alternative?

I don't bother with sniping. I simply put in the price that I'm willing to pay and that's it. And I don't go and watch the auction. People that do always think that if they raise their bid "just

I'd *guess* lanolin (Gojo - pumice free variety) would work well too... (Obviously, I've not tried it... Don't own any 400 series devices.) David wrote:

Haha, the worst auction is one with 2 bidders :-) I avoid that on ebay by using a sniping service. That way I'm not tempted by auction fever. And of course, as every astute auction goer knows, "know

Diode connected BJTs (base connected to collector) have been used in low close in phase noise double balance mixers operating at 10MHz. Bruce

There are interesting devices on ebay https://www.ebay.ca/itm/ECC83-12AX7-12AU7-To-6N2-6N6-6DJ8-Vacuum-Tube-Amp-Convert-Socket-Adapter/233701614445?hash=item3669b3a36d:g:UZEAAOSwiSBfT1SR Maybe you can

I know, it's seven years later. But I just acquired a Type W in the usual state, to wit, 8416's stolen. It looks to me like there's enough empty space to fit a small mains-powered 18V regulated

To all, Thank you for all of your tips and advice. I may take me a few days to have a look at this again, but I will look at each one of your suggestions in turn and post the results. Sincerely, Steve

While waiting for my Schottky diodes to repair my S-1 (and possibly my S-2), I did some searching for currently available substitutes. The late, great Bob Pease once wrote: "One "diode" that does turn

Dennis, I almost fell out of my chair laughing when I read this. You have hit the proverbial nail on the head. One thing I learned early on in the "E-Bay" game is NEVER get in a bidding war. I set an

SIMPLE! Look at the bidding history. 46 bids is all you need to know. Two morons with virtually no buying history on eBay kept outbidding each other a few euros at a time. After a certain point reason

$130 would be dirt cheap for one that is in good physical shape and working properly. I recently gave $325 for a very nice "late" version that was mostly working and thought I got a bargain. There

Right now on ebay they're listed for anywhere between $269 and $1500 (plus tax and shipping, of course). Vince.

Hi Steve, I suspect the noise is coming from the circuit you are measuring with the FET probe. A simple test should be able to determine if the probe or the circuit you connect the probe to is the

Seems like there are a few PG506’s for less than 1K in the USA. I have seen them sell for more than 1K, on multiple occasions on eBay. If you have to have one, then its one of the few devices that

Raymond and Toby, Wow. I only have Danish butter (mildly salted). I will have to revert to Italian butter, less conductive? LOL You learn something new every day. I was not thinking about IPA but

"There are currently more than one on (US) ebay for more than $1K….. -Dale" Typical of today's E-bay. Something sells for $500 so a bunch of greedy jerks post theirs with an *asking price* of twice