开云体育

Take a look at https://www.youtube.com/watch?v=mjF0S-ctXfg as well - shows a relay test with a scope in X-Y mode. Best Peter

Latest info : I have now replaced the timing board with one from the parts-donor. This hasn't solved the problem, so I'm scratching my head again, because the behaviour of the "A INTEN" and "B DLYD"

Adding extra caps is certainly unnecessary, and most probably not a good idea. It defeats what you are trying to achieve. The whole purpose behind adding a cap across the relay coil, or adding a

Hi Is 222 or a 222A? -----Mensaje original----- De: [email protected] [mailto:[email protected]] En nombre de Szabolcs Szigeti Enviado el: martes, 25 de septiembre de 2018 19:20 Para:

Hi, I have made a battery pack for my 222, but interestingly it does not work. It works fine from external power, but not from battery. Closer inspection showed SMD inductors L309 open with burn

Fabio, I was going to ask if you had checked the filter(blocking) diode across the relay coil and also the filter cap with the diode? Where I used to work we had an older CNC lathe a "Tree" brand with

Fabio, It would be nice if we could find a replacement for these, even if an adapter board was needed. I worry about this just about every time I use my 7A13 so I end up using my 7A18 ( with the

Thanks Roger, One question... As my Jig is not ready yet... At first glance, I obviously considered using a reverse diode to contain the back-emf of the coil... but in face of your suggestion (to

Fabio, I built such a relay exerciser to use with the similarly packaged 15V DPDT relays in a 7A11. I just had two LEDs on the NO and NC contacts and it was visually obvious which relays were good,

Hi Dave, Thanks for the advice. I`m building a small test jig on a breadboard, with a 555, to exercise them and also to characterize their contact settling. I wish to be able to tell, from the

Well, never say never, I guess, but in the current state of things, the 547 does not appeal much to me. Sure it has more BW and Triggering features with its tunnel diode.. but... features and

Yeah, it does suck. FFS! Wonder if someone should Email them and offer a better deal? www.cwgsy.net/private/mandoline "Error 008472. Horrible bug encountered. $Deity knows what happened."

Oh, not the 547?

These are rack type and have nice folding aluminum handles... photos of two serial numbers attached. The photos have names starting with serial number. they both can show some readout activity,

Hello Leon I did check both 15V supplies (which is all that the 7A13 uses for the relays). Both of them spot on plus or minus < 0.05V, with less than 5mV noise / ripple (measures taken directly from

Check the supply voltage to the relay's for voltage and ripple both cold and warm. Sent from K5JLR

Before surgery or replacement, you can exercise them and see if that cleans up the contacts enough. Just buzz the coil with a square wave for a thousand cycles or so, and reinstall. That did the

Hello Folks, Thank you to all your input on my previous topic about the 3rd most useful plugin. Not only it clearly demonstrated how regarded the 7A13 is among many users, but it also gave me the

Thanks for all the replies people, I am overwhelmed ! LOL Didn't expect that many replies in just 24H, this list never disappoints ! :-) Too bad that only the 535/545 booklet was scanned, but all

My 575 has adapters I It, too. No little manual... that would have been fun! Phil, N6OMM