开云体育

How does number eight compare to the semi conductors catalog? Dave Wise

========================================================================= Don't forget Catalog #8 "TRANSISTORS, DIODES & MISC. CATALOG" 21 sections. No date found on mine (so far). Paid $80 to get

Jim, I used 'J-B WELD Original' works quite well. Never had much luck with epoxy. Mix it thoroughly and wait a little to firm up before using. Dallas

Catalog 7 is a supplement to the other 6.? Dated Oct. 1984,it is a collection of notes, specs, and advice in a looseleaf tabbed notebook.? JimMc

Thanks, Jeff. I'll try the epoxy, while being careful not to put too much on there and block anything. Weekend project as I had to leave early from work and couldn't get the scrap HP 54504A DSO out of

I just stepped through the #5 catalog that I saved on my computer, and it seems to have everything from chapters 11 to 12 to 13. Though there is a blank page with nothing on it, between chapters, and

Hi Leon, Originally Tek produced 6. If you look at the back cover of the bound ones it shows abbreviated contents for each of the six. I have been told by one person that at some later date Tek

Looks like David G. is going to be able to supply me one. Thanks everyone for responding. Manuel W4SSB

There appears to be no problem actually, when i open the PDF from the link it works fine all the pages show just fine. When I open the downloaded version on the computer it works fine also. It was

Check out. Qservice.com for all your Tektronix parts needs. I’m sure he can get you all you need.

You might be interested in this : https://cleveland.craigslist.org/ele/d/micro-copy-10-microfish/6671300778.html

When my cohort gets out of the hospital, he has a 7613 in the basket for sure. The wrong person worked on the power supply and I couldn't get it going again. Storage also quit on it before that. We

Looking for a front bezel for a 2465B in excellent or better condition. Doesn’t need to have 2565B name badge. Thanks in advance, Manuel W4SSB

Hello, The ganged push button caps of the 475, just as much as the 465 and others of the same vintage are all removable. They're tight fit and it takes quite a good grabbing from their sides to pull

Lettering is mostly gone on most of the push switches. I have a parts 475 with good lettering and am curious if I would have to swap the whole switch assembly or do is there an easier way?

Hello Jim, I don't quite understand what you mean... Q1486 is grounded, but not its carcass. The emitter goes to ground (via wire and A6 main interface board PCB's ground). Maybe you're not looking to

Fabio I have been following this thread out of curiosity and looking at the schematic in my 466 book for this circuit and it is weird. If Q1486 does not have a good ground to mains earth it seems to

Thanks for posting these scans this catalog is a extremely useful one it has the info needed to tell which capacitors are what. There are some pages in the capacitor sections 12 and 13 that did not

Kurt, I'm curious how many of these Catalogs are there? ?Leon Robinson ?? K5JLR Political Correctness is a Political Disease. To: [email protected] Sent: Thursday, August 23, 2018 4:45 PM

Hi, everybody. The formerly dead 7603 saga continues. The white connector where the Right Vertical plug-in connects snapped apart last night. It's such a clean break off the left side (looking into