开云体育

Hi everyone. For a couple of days, some discrepancies happened starting my 2465B. The self test fails, and the 4 traces are no long vertically stable, whatever the time base, vertical gain and trigger

HI everyone. For a couple of days, the self test of my 2465B fails on exercice 05. And an unstability of the vertical position of the four traces has happened at the same time, whatever the vertical

Hi all, again a follow-up, this time on the battery-pack: I used the solder lips to connect the rechargeable batteries, and used several layers of thin tape to make it into a similar unit. To avoid a

Thank you Pete. I will do. Is your 7B53A for parts or broken I presume... not a working one I hope ! :-) Max P.S. to contact someone in PM use the usual "Reply". You'll find little button option at

There is that.? Ran into that too.? But I always documented what I did on our servers, both on hard and soft copy.? That hard copy stuff was in a binder on my desk, and the soft copy was posted to

The other side if the coin is it is sort of like herding cats, especially when you are coming along behind someone 5 years later after they have long since left the scene and NOTHING was documented

Single partitions are great till a log file goes nuts and fills the entire partition.? That's why I always put log files on their own separate partition, same for the users home directories.? Making

On 04/05/2018 09:50 AM, Chuck Harris wrote: > It was never a question of "not being sure" what mode > I was in, but rather one of "being sure" and being wrong. > > It is simply very tiring to have to

I use vim because I learned vi in 1985. The partitions of servers are seldom separated now. I think that reason to use vi is over. I doubt anyone under 50 uses vi at all.

It was never a question of "not being sure" what mode I was in, but rather one of "being sure" and being wrong. It is simply very tiring to have to keep toggling back and forth in the modes. It

Hi all, today the relais and NiMh batteries arrived. Although the relais were the Pin-through-hole type, by bending the pins 90 degrees and shorten them a bit the relay was a perfect fit. The good

Chuckle.? Yeah, vi has it's landmines for the casual user, but it's still a pretty powerful editor with all you can do in it.? The command syntax can get a little arcane but the things you can do

Strange they would force you to use their text editor to do your programming.? All the places I ever worked where we programmed for Unix we were allowed to use our editor of choice.? Be that as it

I suspect that 99% of members know this already - could be it's in their DNA - but for the remaining 1% of us who have this issue and have failed to find anything related via google, here it is: I got

Hi Lukus, It sounds like the jumping might be a stuck or glitchy beam finder switch, or you might have a power supply issue. Both are quite common in a scope of this age. Read this doc <

Hi guys, I put the Gerbers and development files in the Files section. And photos of the completed board in the Photos section. I used OSH Park an got 3 boards for cheap. The Gerber files are all

On Tuesday, I picked up a 2213A. While testing it, I noticed that the trace does not fill the whole display regardless of position settings. I tried messing around with the controls to see if I could

If you would quote some of the message you were responding to, others could figure out what you were talking about. -Chuck Harris zoldanmirco via Groups.Io wrote:

I stand corrected. -Chuck Harris ADas via Groups.Io wrote:

Hi Jeff, If you are referring to strips of bare IC socket pins I have used them. They have one quality I like in certain circumstances: since there is no plastic holder you still have access to the PC