开云体育

There is likely not a problem at all. Firstly, the scope is only good to what, 5%? to 2%, look at the specs. Secondly, probe calibration (in terms of HF compensation) is anything but an exact

Hi everyone, About 20 years ago I needed to replace a step recovery diode in a piece of (non Tek) equipment. I had to test an assortment of diodes for this function and managed to achieve it with a

Since you didn't provide any actual numbers, it's difficult to say anything specific. Generally speaking, though, you shouldn't expect two different types of probes to be exquisitely phase matched --

Well as it happens while I've succesfully rewound one of these motors before, but this time after rewinding and reassmbly I must have caught one of the hall effect sensors on the case of the motor and

Newbie here with a Tek2465b and multiple 10:1 probes, none the same. (but they have been "compensated using the builtin calibrator of the 2465b). I a am feeding two channels simultaneously from the

I got an adapter for using a 27c256 to replace the 4 8K ROMs. I’ll see how this work (when the other parts arrive). I’m now skeptical that the processor is the problem but I’ll work to get the

?ann mi?., 30. des. 2020 kl. 17:53 skrifa?i Chuck Harris <cfharris@... Hey Chuck, Unfortunately that doesn’t help OP, as an impeller will pull the same way whichever direction the motor

Dave, I have a dozen or so older 4xx, 5xxxx and 7xxx series scopes and considering how many capacitors are contained within those dozen or more of scopes, I can say that I have seen very few really

I agree, except in the case of some TDS 420's TDS 640's etc. the bypass caps are just all bad.

If David reads this he should know that you (David C. Partridge) and Tom Lee know what you are talking about and your advice is precisely what I told him as soon as I approved his post. I told him

Nenad, I have a 5103N that appears to be showing double peaking in its CRT, and I'm willing to try making these measurements. Am I correct in assuming that I can do this with nothing more than a

Hi Chuck, Yes, I agree we derailed the subject by going deep into the cathode issues, but I still instinctively believe that double peaking explanation may be within grasp (without major research).

fan blows out the back of the scope. alan.bain@... wrote:

Very silly question but can anyone tell me which way the impeller type fan in a 2465 is mean to rotate; I have rewound mine and realise I don't know this vital piece of information for phasing the

Hi Attilio No, only the crystal and retune the filter Regards! -----Mensaje original----- De: [email protected] [mailto:[email protected]] En nombre de Attilio Enviado el: miércoles, 30 de

Hi Miguel, thanks, if I understand correctly I have to replace the crystal with a 52.5 MHz one and retune the 2nd band pass filter. Do I need to change other components ? Thanks for the info. --

I hope this is the right forum for this message. If not, I apologize and please point me in the right direction. I have been acquiring tek equipment for some years but it's time for me to pass these

I've gotten 100 free listings a month for the last couple of years. Shortly before I decided to get a store they upped it to 200. Vince. -- K8ZW http://www.metalworkingfun.com http://www.hamradio.fun

Not totally true. Stores cost and they do have hidden fees for listing unless you get free listing privileges.? My 23rd year on eBay and boy, has it changed, from great to reasonably sucky. ?Jeff

crystal of 52.5 MHz with 55MHz. tr501 to TR503 TR503 to TR502 501 55MHz to 52.5 http://www.transistorforum.nl/forum/index.php?mode=thread&id=23396 I have a TR502 with 1.8Ghz counter and LEMO cables.