开云体育

If you don't mind watching a 2 hour YouTube video, this is an outstanding one: http://www.youtube.com/watch?v=8ZKMrzTGxLQ Respectfully, Cliff White, W5CNW w5cnw@... <mailto:w5cnw@...>

Do a google search for XYZs of Oscilloscopes. That's a great primer Tektronix put out. You can download it from Tektronix after registering, or there are other copies floating about. Do you have

Since many of the Group members that post regularly seem to have up to 30-40+ years of oscilloscope experience, can you recommend good 'scope books or URLs for _absolute_ beginners? How did _you_

The terminal shape determines the stand-off above the PCB, also for the original Continental Wirt switch. The proper terminal style can be choosen

Took a closer look at the switches on mine. The logo is for CW Switches.

Good Day, This has triggered my curiousity, as I seemed to remember something like a MOD 818... Here is my understanding of MOD 816H, after a few websearches and a brief reading over another

I hadn't noticed those. There was a discussion last week about another MOD and about those coax connectors. I believe they were used in a GPIB capable mainframe for setting the position (? hazy on

Trojan, huh? Figures... "electronically tested"... Yeah I wonder what names have been swallowed over the years! We should make a graph or something! D.

DS1644 (TDS 3x0) and suggested replacement with the DS1744 I took a peek at the datasheet and there are a few differences: DS1644 Unused locations could be used as regular memory DS1744 Unused

Hi ! Have you made any progress with Your 2710 SA ? If the same msg appears when You disconnect the CFC board or the LOG board from the counters (microproc board) the malfunction can be at

<http://www.danaher.com/business-directory> Of course, that is only part of the story. Each of those companies may hold others, such as Tek owning Keithley.... Pretty soon all equipment will be made

Hi Albert, I was wondering whether there might be something wrong with the cable grounding since you can influence the output amplitude when placing a hand nearby. Patrick Wong AK6C ---In

It seems everything in the 1A4 is in a hard-to-get-to place! I'm having to do some work on the channel 2 attenuator module. It was easiest, by far, to actually swap the channels 1 and 2 modules just

Sadly no joy on cranking the bias pot up. Thanks for the hint, though.

The rails all look good, nicely inside specs and nary a ripple in sight. Ugh, I see I mistitled my post - the scope's a 2467, though I suspect it's much the same at the

@ Albert: Thanks for the source. - I may look into them. - What I failed to make clear is that I'm in the UK, so would find it easier and more convenient to deal with people over here. But, if I

Search for slide switch DPDT on your usual sources like eBay and Digikey. They still make 'em but I don't know if they're the right size. My approach would be to flood the switches with contact

My experience with MOD info is it's very scarce on the ground. So if I can be allowed to hazard a guess....There are two coax connectors just visible in the top set of holes within the rear plastic

Thanks! I will check that out.

Devious. So what other sort-of Tek's are there?