开云体育

Phil, Try dribbling some isopropyl alcohol into the switch and working the actuator. This has freed up many switches for me. Then lube. Rick

Dave's part number is correct and Sphere has a few new ones in stock. The Sphere 366-0636-00 picture matches the knobs on a 2210 I have. I don't know what the story is on the 2210, 2211, 2212, 2214

http://www.youtube.com/watch?v=ZVSbt5q0KF8 Very creative... Dave

Recently bought a function generator board from E-Bay. Range .01Hz to 3 MHz. Timing accuracy is excellent, they claim +/- 5 PPM, square wave rise times are < 100nS, waveform is only fair, but, it's

I'm not sure if anyone pointed out that this is backward. Also, the P6056 is not a very good general purpose probe, due to its cost, fragility, and high DC loading. Take it out when you need it, use

Lyle Bickley <lbickley@...> wrote: The good news is that someone got the scope and it wasn't scrapped! (The not-so-good news is that I didn't get it ;) Cheers, Lyle -- Bickley Consulting

Hi!!! Another FREE source for very heavy boxes is new water heater shipping boxes... Stop by the local pro plumbing supply house and ask about them... The plumbers often ask their supplier to remove

Frankly a little hard to tell from the drawing but looks like it is a 366-0636-00 Looks like 8 of them across the top row -? Dave -- Dave Henderson Manuals@... www.Artekmanuals.com PO Box

I like it. Particularly the frequency compensation step. Thanks ... more! Dave

THAT one I have, along with most of the "Concepts" books, including a copy of the early "oscilloscope circuits" book, which I find fascinating. But i had not heard of the app note on probes' I

Yes, so it should work with the 7A19, 29 and 24 amplifiers. Thanks. Dave

Many/most of the 22XX front panel knobs are hard to find and expensive if do find them.

SC503 Up for Grabs. TM515 also available: eBay Item number --> 281064503123 Two (2) 2400 Series Rack-mount Chassis also available --> 281064508770

Another option is to make your own 50 ohm probes. They are not as hard as you might imagine and a lot less expensive than buying a Tek probe. I have made lots of 10X, 20X and 100X probes for my 50 ohm

I'd like to try and find a trigger knob for a 2211 but the (free) manual seems rarer than snake suspenders. Anyone have a manual or a parts list? Maybe another scope uses the same type of knob. It is

Yes. Sorry about that. The other Tek Application Note everyone who owns a scope should read is "The XYZs of Oscilloscopes". You can see why it is easy to mix them up. Dennis From:

"David C. Partridge" <david.partridge@...> wrote: Dave, I wasn't disagreeing. Your list is absolutely appropriate for 50 ohm amps. I just hadn't seen anyone make the point that a 9M probe

The P6056 is for 50 ohm input amps ... Dave

"David C. Partridge" <david.partridge@...> wrote: ...and the 10X probes in that group have a 450 ohm series resistor. The 100X will have a 4950 ohm series resistor. 10X probes made for use

Would that be "The ABCs of Probes Primer"? Dave