开云体育

I'm certainly interested, at least in the PCB. I've actually been having this same battle with a 7A13 this last week, and was getting read to ask the list if anyone had published a PCB adapter since

Typical eBay seller. A $13,000 device, $1000 for shipping , one picture and description copied from the brochure. Anybody who would spend that kind of money based on the listing gets what they

The following photos have been uploaded to the Tek 148-003x-00 relay replacement ( /g/TekScopes/album?id=299851 ) photo album of the TekScopes@groups.io group. *

Hello again, after sending the message I saw that I forgot the most crucial part in my BOM. 1x Relay (IM06TS) 1x Diode Array (BAS40DW-04) 0.1x Pin Header (W+P 952-09-080-2 cut into 10 pieces) 1x

Hello all, after quite a few years of absence from this group and from my trusty 7000-series equipment, I am back. The reason is quite obvious. I have a special measurement job which needs my

I NEED TO NO A RESISTOR VALUE IN THE RCTIFIER BOARD FOR THIS SCOPE MINE IS ALL BURNED UP ANE I CAN'T FINE THE HV OSCILLATOR TRANSISTOR. THANKS JOE

That seems highly likely. It might have been used to test SD sampling heads and the panel connections are from the interface to the heads.

Could this be for someone at tek to do maintenance on SM11 boxes? <clarkfoley@...> wrote:

They appear to related to Option 1M. I suspect someone needed to access the rear connections to the SM11 box and found it more convenient to patch them to the front. A simple unauthorized DIY mod to

That is truly bizarre!? Hard to imagine why somebody would need, or think he would need, that many connectors! Jim FordLaguna Hills, California, USA

Like this: https://www.ebay.com/itm/404611781733

The listing has ended. I would like to have seen the unit.

Hi Folks, I just noticed this unit on ebay. The front panel has a whole extra array of connectors there. https://www.ebay.com/itm/296917599623 Does anyone know what these were for? -Evan

Hi Guys! I use to say that my books activity is 100% non-profit, but I was wrong. When you are so kind to appreciate my work I get my salary! Thanks and best wishes (I will post soon a draft of

The following photos have been uploaded to the JFETs substitution for 12au6s in 575 curve tracer ( /g/TekScopes/album?id=299769 ) photo album of the TekScopes@groups.io group. *

Got your message Richard. I just need to confirm the size with you and find a padded envelope to mail them in.

The crashing is due to some kind of instability when the +5 VL has no load. If I add enough constant load on that supply, the off condition doesn't cause any trouble. It's not something shorting out,

Probing the AE-35 unit in 2001 A space odyssey Perhaps Tektronix P6006, Kubrick was a stickler for accuracy.... http://www.2001spacesuit.com/Images/AE35-1.jpg Jon

Re Probes, cable legnth.... The P600x had relatively thick cables, and massive screw on probe tips, hats. Meant for tube sockets and B+ voltages. Compensation was by rotating the probe body. The

Photo of my 536 in the photo library /g/TekScopes/photo/299466/3866580?p=Created%2C%2C%2C20%2C2%2C0%2C0