开云体育

[email protected]> wrote: I did look for a schemat

That link should redirect to: https://bama.edebris.com/download/tek/11403a/11403A_SM.pdf Michael A. Terrell

Thanks a lot John, in just a couple lines you managed to make it all limpid ! :-) So looks like the Hold-off feature can be used to "select"/pick a particular event in a complex waveform. I now

service manual is 404 for me as well..broken. The user reference is fine...link works Renée

Thanks, Tom, for this reply, the only one I received. I did loosen the knob set screw and remove the red VAR knob. My replacement skirted knob does have a long shaft that goes through some kind of

The link works fine. The .pdf manual is here. http://w140.com/11403A_SM.pdf

Michael A. Terrell

The hold-off circuit introduces a delay between one sweep cycle and the next. Thus the longer the delay, the less often the sweeps occur, which affects the brightness. If the trace is bright with

and he often delivered. Got several copies, including "the complete venus equilateral" which had a story or so not in the hardback. You might also want to find a copy of "Lost in Space" by George O.

I must be doing something wrong. The reference to a service manual comes up 404 for me. Please let me know what I am doing wrong and what page(s) I should be looking at. =pete

Vince, If you like YouTube, try D Lab Electronics, Uncle Doug, Mr Carlson's Lab, El Paso Tube Amps and many other Tube amp related contributors. There is a wealth of good info on tube amp testing and

Harlan Ellison always came across as too self important. I saw him interviewed a few times, and he always came across as an ass. He loved the line, "I don't owe my readers anything!" Have you ever

I've had a couple of TDS7x4 scopes with issues on that board. Below are some notes that I wrote up once for the group. Also I have a schematic that I got somewhere for a TDS544 HV board, and I was

I have to see if the old PCB design software I have still works. I'll probably make a sample run of ten, to see how they turn out. I am looking into a CNC controlled engraver to mark the extruded

Already was in electronics by that time. Also consider "Demon with a Glass Hand" which was one of the few things by Harlan Ellison that I can like. oh, and also "Behold, Eck!" Harvey

I threw one of these together a year or so ago- photo of internals here- http://homepages.ihug.co.nz/~tractorb/tdr%20pulser%20internal.jpg It works very well- considering how simple it is. But an SMD

It was Episode one, of Season one. It was one of the very few Sci-Fi TV episodes that sucked me into the storyline. It first aired in 1963, and I was just 11 at the time. :) Michael A. Terrell

I missed this one or don’t remember it. Thanks for the link. My fav was “Controlled Experiment” with Barry Morse and Carroll O’Connor. I’ll be enjoying ‘Galaxy Being’ tonight. George

There's a link to the manuals on the TekWiki site: http://w140.com/tekwiki/wiki/11403

This is a product of them being a FOR PROFIT business and nothing more. So many think they are a gov’t entity