开云体育

Thanks Tom.... I guess I needed a nudge to go back through that section. I had before, checking voltages and resistances and everything LOOKED close..... Well, thanks to your suggestion, I went

I just happened to see your post and then eBay item number 121520632728 right after. It is a 576 that is being parted out. Maybe the transformer is still available. DaveD

Hello Dave, I'm the guy from germany with the HV transformer at fault in an otherwise quite well working 576. If you happen to have one of those rewound transformers left, I'll be interested of

Hi to All, Just received a DL-11 Delay-Line. On this moment I'am looking for its Operation/Service Manual to make it complete. I can only locate the 070-7051-00 DataSheet of it. Anybody who has

All of the trigger inputs (internal, line, and external) should activate the trigger light when a trigger is present. If P-P Auto triggering is active, it should be difficult *not* to have a

I have a scan of a Huntron 1005B-1 manual (37 pages) if anyone needs it.Has parts list & schematic. ?HankC, Boston WA1HOS [Non-text portions of this message have been removed]

Have you tried using a external trigger input? Mike

Hi Steve, How about starting your search where the A sweep waveform originates on page 3-10 in the "Theory of Operation" section. It clearly describes how the waveform is generated. tom jobe...

Hi, I use this Hameg feature since 1981. The construction is rather easy, you need an independent winding on the 50(60) Hz power transformer and 2 resistors. One resistor will exhibit voltage and the

Hi Michael, Yes, I have checked LINE (no trace) and EXTERNAL trigger and I get no trace but if it's a clue, when I connect a signal to the external trigger port, I DO get the trigger light on ....

any place I can find. my test bench is in the laundry nook. and that is our single wide in town. our double-wide at the ranch has a 14x12 bedroom that is all mine! my wife plans on working in town

As with any piece of equipment it has its nitch the huntron tracker will?evolve I have used and demonstrated the tracker in large?pc board shops they love it. Most of the people who use it are not

Double wide, half of one to live in and the other one and a half for scopes? That sounds fair. Peter

Wait a minute. ?you have a mobile home? ?where on earth do you keep all your scopes? ? Dan

Thanks, guys!. Micheal, there are some good exercises in there. I'll play with some transformers on my Philips PM5132 and figure out the impedance. (I tend to 'binge' on this stuff in January and the

Hi, I may have found a decent coax tester. I wanted something to check out the TV cables in my double wide mobile home. The Klein VDV Distance Meter does a mice job of that. It comes ready for

<Any curve tracer (even the venerable 575) can do everything a Huntron Tracker can do. In fact a Huntron is just a simple one parameter curve tracer. The thing that surprises me all the time

Mark Wendt mark.wendt.ctr@... [TekScopes] wrote:

FWIW One of the Tek scopes in my ToBeFixed line really can't do anything useful and yet it does not have any! electrical problems. It's just a case of ( front panel ) switches that don't.....

'Dennis Tillman' dennis@... [TekScopes] wrote: Most have never used anything better than the Huntron, or other low grade device. They are shown the one use, and that's it. I had to show