Re: 647 cal fixture on ebay
Actually, it means "If I Recall Correctly"
(& it's not Ham lingo, it's "internetese")
Jeff
By
Jeff W <vwthingy@...>
·
#7030
·
|
Anybody know what this is?
Hi Guys,
I've recently acquired a Tektronix 11401 Digitizing oscilloscope,
with 11A32 2 channel amplifier module. Does anyone have any more
information about this unit please? It doesn't look
By
nn2027299 <silvermoon.group@...>
·
#7029
·
|
Re: 7S/7T Sampling System
Well, there are some reports on the Picosecond Pulse labs website that they
produced during the 80's and early 90's with tests on sampling systems.
They found that there was a problem with the
By
Craig Sawyers <c.sawyers@...>
·
#7028
·
|
Re: 7S/7T Sampling System
Without knowing details of calibration, let me point to a power
supply/fixture 283 (I think) that supplies power to S52 and feeds trigger
signal to front panel. Something like that could be used to
By
Miroslav Pokorni
·
#7027
·
|
Re: 647 cal fixture on ebay
IIRC = "if I recall"
Miroslav Pokorni wrote:
By
Dan Kerl
·
#7025
·
|
Re: I couldn't stop the tears...
'did CRT survive', my, is that a long shot. I have seen some optimists, and
heard of school of positive thinking, but Don beats them all.
Regards
Miroslav Pokorni
By
Miroslav Pokorni
·
#7026
·
|
Re: 647 cal fixture on ebay
What does 'IIRC' mean? I presume, that is one of those cute ham operators
abbreviations, that even few of them know what they mean. Not all of us on
Tekscope are ham operators.
Regards
Miroslav
By
Miroslav Pokorni
·
#7024
·
|
152-0214-00
I have one 152-0214-00, it is brand new. Who wants it "FREE".
Dan Tulloss
Senior Metrologist
National Test Equipment, Inc.
760-639-1700
760-639-1799 Fax
www.nationaltestequipment.com
By
DANNN31
·
#7023
·
|
Re: Tunnel Diode for 1S1
wrote:
on ebay
a lot of
0125-00 "
In the RPR (Replaceable Parts Records) 152-0125-00 is listed as a
direct replacement for 152-0214-00 in the 1S1 if it is D304. For D345
152-0093-00 should be
By
zenith5106 <zenith@...>
·
#7022
·
|
Re: Tunnel Diode for 1S1
ebay
lot of
"152-0125-00 "
It's that little black drop with a tiny red dot on it, isn't it?
That TD252 is a relatively *fast* TD, Rise Time 320ps.
The Valley Point Terminal Capacitance is typicaly
By
Jorgen Lund-Nielsen
·
#7021
·
|
Re: Tunnel Diode for 1S1
Hi Gregor
Well - what are you going to do? I think you'll find that the TD252 is
unobtainium. Since buying Stan's 4.7mA tunnel diodes, which don't cost a
king's ransom, is better than nothing why
By
Craig Sawyers <c.sawyers@...>
·
#7020
·
|
Post not working
Who is the Owner/Moderator of this list?
I've noticed that my new posts (since a week or so) have not been
published on the list. On the other way receiving posts works ok.
Actually I'm posting from
By
reesaart2004 <yahoolists@...>
·
#7019
·
|
Tunnel Diode for 1S1
Hello again!
Thank you for your quick reply. I've also seen this Tunnel Diodes on ebay
but these are NOT "TD252 (152-0214-00)" !!
The ones that are sold on ebay are also used in the 1S1 (there are a
By
Gregor Lasser <e0125809@...>
·
#7018
·
|
Re: 7S/7T Sampling System
I don't think that necessarily helps - the full cal procedure for the test
fixures calls for a 7S12; a pulse generator (S52) is used to supply a clean
and fast pulse and the two sampling heads look at
By
Craig Sawyers <c.sawyers@...>
·
#7017
·
|
Re: I couldn't stop the tears...
looks like evil was trying to jump the Grand Canyon when it fell out. Ouch!!
There does seem to be some good parts though. If anyone buys it can you let us know if the CRT survived, the shield is
By
jeans <jeans@...>
·
#7016
·
|
647 cal fixture on ebay
Hi, all;
IIRC someone on this group has a 647.
FYI there is a cal fixture plug-in 016-0224-01
on ebay #3801315295.
(usual disclaimer etc.)
kindest regards
Tim
By
Tim Phillips <t.phillips@...>
·
#7015
·
|
Re: 7S/7T Sampling System
Is there a writeup or a brief overview describing the
differences between the A and non-A versions?
Thanks,
Gottfried Ira
http://ira.club.atnet.at/
Dennis Tillman wrote:
By
Gottfried Ira <ira@...>
·
#7014
·
|
7934
Just spotted 3801330192 on eBay. This seems to be the fairly rare 7934
storage scope, but it comes with a 7T11/7S11/S4 sampling combo (and
7B80/7A18). I have no idea whether the sampler works.
They
By
Craig Sawyers <c.sawyers@...>
·
#7013
·
|
Re: Tunnel Diode for 1S1
Hello Greyhawk,
That auction is being conducted by Stan & Patricia Griffiths, w7ni, so you know it is quality product.
Good luck.
Dsrrin
Greyhawk <greyhawkeng@...> wrote:
Some FYI... The
By
Darrin Conniff <djconniff@...>
·
#7012
·
|
I need a function generator.
Newbie to your list...Hi all.
Im new the the audio amp building hobby. Ive built 4 or 5 small tube amps. They all worked well. More or less. So I bought a cheep T922 scope.
Im learning to use it.
By
Phil Townsend <philji@...>
·
#7011
·
|