For a stub tube the correct diameter. I have taken a larger diameter and cut it down and welded it back to gather at the correct diameter. Grind the weld down and slip it in place. It is just a stub tube not really structural.
toggle quoted message
Show quoted text
On Feb 15, 2025, at 10:15?am, Keith Klos via groups.io <kloskeith@...> wrote:
Thanks Charlie
I was trying to use some leftover tube that I had laying around but did not have the size and wall thickness that would "nest" properly.? ?I made a serious mistake when I finished my build.? ?I gave almost all of my leftover tube to a friend that does a lot of race car work.? I should have kept it.
?
I think I have a usable piece now after using Bill's? #2 solution.? Just need to go down and fit it and drill the bolt hole.? Was going to do it today but we got about 4-6 inches of snow last night and I had just washed my truck.? Don't want to get it all full of salty slush again.? Around here they put some sort of salt solution on the roads before a snowfall.? ?I really don't like getting that stuff on my truck or car.
?
Keith
