Install the cowl in line with the spinner. If the engine sags install shims at lower mounts.?
On Wednesday, February 5, 2025 at 02:11:19 PM MST, Jim Schmidt <jim47ex@...> wrote:
I'll? have to measure mine, I know mine is to tight. I have to put tape on it because It rubs when I try to remove the bottom cowel. Also make sure the spinner is 1/8 to 1/4 inch above the circle in the cowel. In other words the cowel needs to be installed1/4 inch low. The enginemount rubbers will sag over time and then it will line up. Mine took about 3 years to drop. Now its still perfect after 16 years.
