On May 2, 2023, at 11:38 AM, Tim Kelley <tim.kelley@...> wrote:
Good afternoon Dan, Andrew, So I have removed JMRI / DecoderPro from our test case. I am using a Digitrax DCS240+ command station, a SoundTraxx PTB-100 programming track booster, a Digitrax UR93, and a Digitrax DT602D duplex/wireless throttle. I attempted to do a "nuclear" reset by programming the CV's directly by using the throttle. I am using my dedicated programming track. I set the throttle to use Direct Mode on programming track (Digitrax documentation says this is the preferred mode) CV201 = 5, CV202 = 0, CV203 = 0, CV204 = 8 I did the nuclear test sequence and nothing.....No Nuclear Reset..I read back the DCC address and it did not change. I would have expected it to have gone to 3. (Correct???) What are your thoughts? Any ideas? Thanks, Tim
