I managed to get the specs back online from the original
tartan27owners.com site. I also found some other interesting
documents that are worth reading.
--- In T27Owners@..., calebjess@... wrote:
WD,
On the 'Files' section of the group page there is a file called
information.htm which has a lot of dimensional info on the T27. With
some basic trigonometry you can figure out the lengths for all
shrouds and stays. I think that the relevant numbers you need are
these:
Sloop Yawl
I 34.65' 33.50'
J 9.83' 9.83'
P 30.50' 29.50'
E 13.50' 13.00'
PY 13.00'
EY
5.67'
All wire is 7 x 19 stainless
----------------------------------------------------------------
-- Standing Rigging Lower Shrouds--------
7/32" Upper Shrouds-------- 3/16" Forestay ------------
3/16" Backstay ------------ 3/16" Lifelines -------------
9/32" including vinyl 3/16" wire Genoa Tracks --------- 1"
Mainsheet traveler ---- 7/8 many have up graded to 1" Spreaders -
------------ 7 degrees above Horizontal ------------------------
--------------------------------------------
-----Original Message-----
From: wdpurcell@...
To: T27Owners@...
Sent: Mon, 21 May 2007 1:50 PM
Subject: [T27Owners] standing rigging
Does anyone know the lengths of the upper shrouds, forestay and
aftstay? I want to replace the standing rigging on "Gusto", a 1967
T-
27, hull # 284. She is a fine sailing vessel (I have owned her
twice)
but find I am not sailing her as she deserves due to concerns about
the
rigging being older.
Yahoo! Groups Links
______________________________________________________________________
__
AOL now offers free email to everyone. Find out more about what's
free from AOL at AOL.com.
