¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. T27Owners
  2. Messages
Single Messages Topics Expanded Polls

Re: SPREADER WIDTH.

Matthias Klemm
 

¿ªÔÆÌåÓý

I think it should say 1x19 for shrouds and stays and 7x19 for lifelines.

?

From: T27Owners@... [mailto:T27Owners@...] On Behalf Of calebjess@...
Sent: Saturday, November 10, 2007 19:26
To: T27Owners@...
Subject: Re: [T27Owners] SPREADER WIDTH.

?

Hi,
I suggest you take a look at a page in the Files section of this yahoo group called information.htm? There is a good amount of other info stored there as well.
It does not specify a width for the spreaders but I bet you are looking for the length as well as possibly the diameter of the spreader material which I won't know until I pull my mast again.? Perhaps someone else knows the specific dimensions of the spreaders.? Somewhere on information.htm it does specify the dimensions of the mast and you may want to measure and compare to your current mast (it might be the original).
As for standing rigging wire sizes, that info is there also but I will paste it here:

All wire is 7 x 19 stainless

------------------------------------------------------------------

?Standing Rigging

?

Lower Shrouds-------- 7/32"

Upper Shrouds-------- 3/16"

Forestay?------------? ?3/16"

Backstay??------------ 3/16"

Lifelines???-------------??9/32" including vinyl 3/16" wire

Genoa Tracks?--------- 1"

Mainsheet traveler??----?7/8??? many have up graded to 1"

Spreaders?-------------?7? degrees above Horizontal

?--------------------------------------------------------------------
Good luck with your rebuild.? These are great old boats if put together well.
Caleb Davison
#328, Odalisque, 1967

?

?

?

-----Original Message-----
From: daiksan
To: T27Owners@...
Sent: Sat, 10 Nov 2007 2:42 pm
Subject: [T27Owners] SPREADER WIDTH.

HEY ALL,




I'M REBUILDING A T-27 #156 ,STILL.




CAN YOU TELL ME WHAT THE WIDTH OF THE SPREADERS IS?? I THINK THIS RIG 




HAS A DIFFERENT MAST.? ITS 3X6 OVAL. SOUND RITE?




ALSO, HE HAS CHANGED THE WIRE SIZE ON THE LOWER SHROUDS? TO 3/16. 




ORIGINAL SPEC CALLS FOR 7/32. THE WHOLE STANDING RIG IS GOOFY WITH 




DIFFEREENT SIZE PINS TO LARGER HOLES AND SO ON.




I ALSO HAD A RIGGER TELL ME THAT I SHOULD HAVE 7/32 WIRE ON THE INTIRE 




STANDING RIG!?




THANKS MICHAEL SV PLANE JANE...OR PATINA...OR TRABAJABA.? HAVNT 




DECIDED THAT YET.



















?




Yahoo! Groups Links









<*> To visit your group on the web, go to:




??? 









<*> Your email settings:




??? Individual Email | Traditional









<*> To change settings online go to:




??? 




??? (Yahoo! ID required)









<*> To change settings via email:




??? mailto:T27Owners-digest@... 




??? mailto:T27Owners-fullfeatured@...









<*> To unsubscribe from this group, send an email to:




??? T27Owners-unsubscribe@...









<*> Your use of Yahoo! Groups is subject to:




??? 




?

Email and AIM finally together. You've gotta check out free !
Join [email protected] to automatically receive all group messages.