开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育

Re: Tools


 

开云体育

Okay, I used Pauls Format and added or subtracted as I saw the need, I had a few additions and some subtractions. Took a minute.

Andy

?

PERSONAL COMFORT

  • Foodstuffs/drinks
  • Personal Cooler with Cold Packs
    • Try to keep the foodstuffs out of sight
    • don't eat at the Layout!?
  • Foldable 30-inch Directors Chair with Table and cup holder (so no food on the Layout)
    • You want to be able to sit but keep your head at the same height as visitors

to your Layout.? Otherwise, you have to stand up to talk to people.

? ??POWER

  • Surge Protector for the DCC and computer equipment

·??????? 12 gauge Extension cords

·??????? 14 gauge Extension cords

·??????? Two each, 5-way Power Distribution with Circuit breaker

·??????? Power strips and extension cords MUST be commercial, UL-certified!

·??????? gaffer's tape to hold them down (gaffer's tape removes cleaner than duct tape)

???COMPUTER Stuff

  • DCC all in one Command and control box/5amp
  • Spare Raspberry Pi
  • Cables for AIO system Video, charging station, etc
  • Spare 10 amp DC power supply as a backup for AIO System or additional ACC power needs.
  • Bluetooth Keyboard and mouse for embedded RPI.
  • Back up JMRI OS on 32GB cards in case of card failure

??? STATIONERY AND OFFICE SUPPLIES

  • "Certified" Labels to certify new or uncertified modules.
  • Module certification Checklist
  • System-specific instructions for electronics
  • Marking pens

????? ?Batteries

  • AAA
  • AA
  • 9v

? ??ADHESIVES, GLUE, and TAPE

  • 5-minute epoxy
  • Super-type glue
  • Canopy glue
  • Gaffer's tape

WIRES AND CABLES

??? NCE System:

  • Power Bus Wires
    • DC
    • DCC
  • Extra power-pole connectors
  • Crimper for power-pole inserts
  • Heat shrink
  • Electrical tape
    • Black
    • Red
    • Yellow

ELECTRONIC TESTING EQUIPMENT:

·????????? DCC Meter and probes

·????????? Multimeter and Probes

·????????? T-TRAK Module Tester

??? DCC SUPPLIES AND EQUIPMENT

  • NCE ProCab
  • AIO Unit
  • Additional 5 amp Command station/Power booster
  • Inline DCC meter
  • Inline EB1 Circuit Breaker Modules
  • Broadway Limited DCC address changer
  • Old Cell Phones for 'Engine Driver'
  • Tablet for Engine Driver???????

????DCC WIRE SUPPLIES

  • Anderson PowerPole Crimper
  • Wire stripper/cable stripper
  • Wire for hookup and repairs
  • Soldering iron, solder, soldering iron holder, Flux, etc.
  • Anderson PowerPole connectors (Red/Yellow/Black for DCC) White/Black for DC)
  • Kato extensions
  • Anderson PowerPole/3-way Kato adapters
  • Velcro ties

????? CLEANING SUPPLIES

  • Lint-free Paper Towels
  • Alcohol
  • GooGone
  • Paintbrush for dusting modules

?? ?WHEEL CLEANING STATION

  • fiber-free paper towel looped over section of track
  • powered to clean engine wheels

??? DCC PROGRAMMING STATION

??????? -- 'test track' connected to DCC program track output on AIO station

?? ?MODULE SUPPLIES

  • 2 ? inch 1/8th hex 1/4-20 bolts
  • Spare encapsulated nylon nuts (feet)
  • Red Tread lock
  • height gage
    • Stuart Denniston Custom height gauge
    • 2-3/4" wood block square

?? ?TRACK SUPPLIES

  • Kato Insulated rail joiners
  • Kato UniJoiners
  • Kato Power Joiners for emergency power drops
  • Assorted track to fill in places where they're needed!
    • --some tiny, some larger; bring some bridges!
  • wire brushes (for cleaning track ends)

??? ?TOOLS

  • Tiny Tools for fixing engines & rolling stock
  • Tweezers
  • Dental tools
  • Drill & bits
    • if cordless, bring the charger!
  • Screwdrivers ????
    • Standard flat,
    • Standard #2 Phillips
  • 41 pc Kline tool set (Multibit)
  • 1/8th inch (9 inches long) Hex tool for leveling
  • 3mm hex tool for leveling screw inserts (t-nut replacement)
  • 5/16ths socket
  • 5/16ths wrench
  • ? inch socket driver for Drill)
  • Nylon Pry tool
  • Mini hammer
  • tape measure 25'
  • 4' level (for leveling tables)
  • "T" levels (for leveling modules)
  • Heat gun
  • Needle-nosed pliers
  • Wire cutters/nippers
  • Rerailer ramps
  • Graphite for leveling bolts
  • Brass Mini Brush
  • Nylon Mini Brush

??? TABLE TOOLS & SUPPLIES

  • A 100-foot roll of Black Plastic tablecloth (Dollar General)
  • 10- 6’foot nylon tablecloths
  • 10-6-foot Tables (more or less as needed)

PERSONAL SAFETY ITEMS

  • First Aid Kit
  • Latex gloves
  • Spray Alcohol

?

Andy J. Zimmerman

ATCS AW USN Ret.

BBMRA President
NRMRC Member

NRail Vice President and Social Media Manager

NMRA SSR President
NMRA Standards & Conformance Manager and? IT Volunteer Member

Ph- (C ) 850-524-4399

?

?

From: [email protected] <[email protected]> On Behalf Of PaulMmn
Sent: Sunday, February 25, 2024 3:09 AM
To: [email protected]
Subject: Re: [T-TrakGlobal] Tools

?

Here's a list from my web site of tools and 'stuff' that you might need at a show.? It is written from the point of view of a layout organizer.

?

What To Take
???? "So they loaded up the truck and they moved to Beverly..."

If you've ever been to Summer Camp you know the first rule-- PUT YOUR NAME ON EVERYTHING! Goes double for a train show when one re-railer ramp looks just like the next! Put a paint stripe in 'your color' on things. Use a paint pen and write your name or initials on the bottom of every engine and piece of rolling stock you plan to bring! Put your name on your modules. This can be up-front and gorgeous-- you -want- everyone to know you built it, don't you??

The remainder of this list gets into a lot of minutia; things that you might need if you're organizing a major show. You won't (or shouldn't) need a lot of these things all the time!? It includes everything to re-build almost anything: power-pole cables; self-destructing modules; and getting the computer running.

This is overkill for most shows-- most of the problems this list can fix should never have shown up at a show in the first place!

??? PERSONAL COMFORT
??????? Foodstuffs/drinks
??????? -- Try to keep the foodstuffs out of sight
????????? -- ideally, don't eat at the layout! ?
????????? -- don't talk with your mouth full
??????? Tall stool
??????? -- You want to be able to sit but keep your head at the same height as visitors
?????? ???? to your layout.? Otherwise, you have to stand up to talk to people.
??????? -- I found a >guitarist's folding gig stool< that folds nearly flat
?????? ???? and was as tall as my 'tall stool'
??? POWER
??????? Surge Protector for the DCC and computer equipment
??????? Circuit-breaker-protected power strips
??????? Extension cords
??????? -- power strips and extension cords MUST be commercial, UL-certified!
??????? Cord covers to run cords across aisles
??????? -- gaffer's tape to hold them down (gaffer's tape removes cleaner than duct tape)
??? COMPUTER Stuff
??????? Laptop computer for JMRI - AND POWER SUPPLY!
??????? computer interface &c
??????? Printer for labels
??????? Printer for paper
??????? drivers &c for printers you've dragged along
??????? cables for printers, JMRI, etc.
??????? power supplies for anything that needs them
??????? Labels, paper, etc. to feed the printers
??????? ink, ribbon, etc. for the printers
??????? USB hub and power supply
??? STATIONERY AND OFFICE SUPPLIES
??????? Sticky Labels (non-computerized OK)...
??????????? ...to label modules (removable)
??????????? ...to label cables (perm)
??????????? ...to label tools (perm)
??????? Zip-lock bags, assorted sizes
??????? -- coil individual cables in a bag!? Avoid the tangles!
??????? -- collect similar items in a bag
??????? Marking pens
??????? -- some permanent, some dry-erase (writes on glass)
??????? Binder clips
??????? Easel
??????? Flip chart pads
??????? Markers
??????? -- dry erase for white board! ?
????????? -- Keep the permanent markers hidden, or they'll be used on the white board!
??????? White board
??????? 3x5 cards
??????? 4x6 cards
??????? Pens, pencils, etc. etc.
??????? Booklet Stapler
??????? Heavy-duty paper punch
??????? Batteries
??????? --AAA
??????? --AA
??????? --9v
??? ADHESIVES, GLUE, and TAPE
?? ???? 5-minute epoxy
?? ???? Super-type glue
?? ???? Elmer's carpenter's glue (it can be the pocket-sized bottle)
?? ???? Gaffer's tape
?? ???? Duct tape (but not for holding wires to the floor!)
?? ???? Scotch tape
??? WIRES AND CABLES
??????? Loconet
??????? Power Bus Wires
??????? -- DC
??????? -- DCC
??????? Extra power-pole connectors
?? ?Crimper for power-pole inserts
??? DCC SUPPLIES AND EQUIPMENT
??????? DCC base/controller/etc. etc. stations
??????? UP5s for outside lines
??????? UR91 and UR92 Wireless Access Points
??? DCC WIRE SUPPLIES
??????? Phone cord crimper
??????? Wire stripper / cable stripper
??????? Wire for hookup and repairs
??????? Soldering iron, solder, soldering iron holder, etc.
??????? RJ12 (RJ25) Plugs
??????? Silver-Satin 6-conductor phone cable
??? CLEANING SUPPLIES
??????? Paper Towels
??????? Alcohol
??????? GooGone
??????? Brasso
??????? Paint brush for dusting modules
??????? Rerailer ramps
??? WHEEL CLEANING STATION
??????? -- paper towel looped over section of track
??????? -- powered to clean engine wheels
??? DCC PROGRAMMING STATION
??????? -- 'test track' connected to DCC
??? MODULE SUPPLIES
??????? Bag of 1/4-20 bolts in assorted lengths
??????? 1/4-20 T-Nuts (as spares)
??????? height gage
??????? -- this can be blocks of foam or wood 2-3/4" square
??? TRACK SUPPLIES
??????? Kato Insulated rail joiners
??????? Kato UniJoiners
??????? Kato Power Joiners for ?emergencyí power drops
??????? Assorted Track to fill in places where they're needed!
??????? --some tiny, some larger; bring some bridges!
??????? Dremel tiny wire brushes (for cleaning track ends)
??????? -- use 'pin vises' to hold these
??????? Multi-Meter
??????? -- Or Continuity Tester with Kato Connector and probe
??????? Clear nail polish- to daub on turnout frogs if they cause shorts
??? TOOLS
??????? Tiny Tools, for fixing engines & rolling stock
??????? Drill & bits
??????? -- if cordless, bring the charger!
??????? Screwdrivers = flat, Phillips, square drive, etc.
??????? 10-in-1 tool
??????? hammer
??????? Chalk line 100'
??????? tape measure 100'
??????? 4' level (for leveling tables)
??????? 2' level (for leveling modules)
??????? Needle-nosed pliers
??? TABLE TOOLS & SUPPLIES
??????? Shims / carpenter shims
??????? -- paint some black for top-of-table use
??????? Black Garbage Bags (for emergency table covers)
??????? No-bolt table-top lifts
??????? -- 1-1/4" blocks, lifts table from 2-3/4" to 4"
????????? -- 2x4 block with Forstnered hole
????????? -- assumes tables have peg-legs



--Paul E Musselman

.

On 2/24/24 6:27 PM, Bruce Alcock wrote:

Paul mentioned having a set of tracks, various lengths, to fill in gaps.? Someone else mentioned something about tools.? lt seems like putting together a list of tools that people take to shows would be a good idea which can then be transformed into a Newsletter article.? So exactly what length of track pieces would you recommend having available in your T-TRAK toolbox?? How about other items to carry? We have a track cleaning wand, levels, and brochures among other items. Please do a reply with what you take to a show in your T-TRAK toolbox.
thanks
?-bruce


Virus-free.

Join [email protected] to automatically receive all group messages.