开云体育

Is there a link to photos of the mod process and implementation?

Min from advisory board.... Change Rudder Angle To A More Vertical Rudder It was proposed and approved after a long discussion and a year-long evaluation period that a modification of the existing

The rudder rule change is something I didn't know about - what advantage doe it bring?

The class passed it but don’t drilled a new hole yet can’t use it till world sailing approves it

It would be interesting to see, but I suspect that the position of the mast/rig (fixed) ?in relation to the daggerboard (fixed) would mean that it would be way off-balance. I only have a bit of

Kinda makes you wonder: "do you tell them what they really have", and, having windsurfed a few times in my youth, nowI'm curious as to how well that works on a Sailfish, assuming you used areal

Anyone in Maryland area looking for Sailfish project(s) these are currently listed on CL incorrectly labeled as Windsurfers. (Not my ad, I'm just the messenger :)

thanks "lewis.kent@..." for the comment about moving the halyard up a bit. i was wondering myself if the placement was/is right. this boat had been rigged with a sunfish sail which was too

Lots of detergent in your soapy water. Bucket with a sponge. Slop it all over. Wait patiently. Have a grease pencil so you can mark the spots that are leaking. Any Sunfish can be saved ...

Our battery powered Porter Cable wet/dry vac works great. Also nice for clean up after sailing. https://youtu.be/RMqY8VSIwtU https://youtu.be/RMqY8VSIwtU https://youtu.be/6BYwNLxZsEg

If you have a shop vac, you might be able to attach the hose to the outlet vent and put the other end of the hose into an inspection port.

And left cockpit vent hole open to not over pressurise Sent from my Verizon Motorola Droid

For air pressure, I got a low price 12 volt blower looks like a miniature hair dryer with cone shaped blower nozzle fits tightly in drain hole from Walmart made for inflating camping air mattresses,

Rinsed off the pollen, evicted a squirrel, shakedown cruise for 1965 Sunfish WAVE and 1984 Sunfish MADISON. We also signed off a new Skipper! Hope your Spring is near. Cheers Kent and

Looking at the picture, you might consider tying the halyard farther up the upper spar (gaff). That will bring the tail end of the boom up a bit. She looks like a lot of fun! We had some Minis for

Nice work on the Minifish Rolan! And great pictures of damage commonly found inside mast tubes and daggerboard trunks, chipped resin. A simple fix with some fresh thickened epoxy or epoxy putty.

I meant to say sail it and then see where the water runs out when she's back ashore :) That's how we found a leak on one of our boats. She had a soft spot on the keel that we didn't notice, trailer

Speaking of the hole on the forward wall of the cockpit, that is indeed a vent hole, it keeps the pontoon hull from overpressurizing on a warm day, which could pop a seam and/or detach the foam block

You're welcome. Have fun playing with bubbles. Cheers Clark and Skipper

Thanks (I think!)