Lane,

The backside of my cam cleat is not inside the hull.? Mine is an early sunfish and the deck overhangs several inches.? I just cut a backing plate out of a piece of treated deck board and thru bolted it.? Solid as a rock! I have also installed a horned cleat along side the cam cleat (not pictured, a later improvement) so I can drop my sail from the cockpit w/o having ?to scoot up to the mast cleat.? Also is the pic of the tiller lock which can be adjusted from locked to easy sliding.? I keep enough tension on it so the tiller will stay put in any position.? It allows me to turn it loose momentarily when tacking so I don’t have to switch hands behind my back.? I am an older guy with less agility, athleticism, and flexibility than I once had, so these little things make sailing? a bit easier.

?

I have also made little carpet covered rails with a small winch ?and roller to make launch and retrieve from my dock.? I’ll post some pics.? Making rigging, launch and retrival easy.? Gets me get out there more often.? No more than 10 minutes to rig and launch.? Of course having a backyard dock is a great advantage.? Many days I will decide to go at 3:00 and be back and derigged by 5:30.

?

Mr Mike

?

Sent from for Windows 10

?