I have the rivets, I bought it with the trim ?Thanks!?
On Sunday, May 5, 2019, 8:09 PM, Thomas Payne thomas3452@... [sunfish_sailor] wrote:
?
I have the exact rivet here. It is 1/8" Diameter x 3/16" Grip. The Part Number is: AD43ABS. Rivet, Alum/Alum 1/8d x 3/16g,?
I will mail you 50 of them if you'll Pay Pal me $5.00. I think that will cover the postage.?
Tom?
On Sunday, May 5, 2019, 6:49:07 PM EDT, Craig cjo1023@... [sunfish_sailor] wrote:
?
With new trim. Haha. Anyway if you need to remove damaged trim then you need to drill out the old rivets. Then trim will come off. Use small diameter drill, 1/8”, otherwise you could accidentally drill a bigger hole in deck.
When replacing with either new trim or used trim I try to use the same holes. May not always be possible.. In which case a 1/8” pop river will work. Don’t drill through lower or underside part of trim, only top part of trim and deck. Pop river is 1/8” diameter and no more than 1/4” long.
If you need trim I have one complete boats worth and then some other smaller pieces.
If shipping is required I would have to limit to about 5 ft long.
On Sunday, May 5, 2019, 4:37 PM, Charles Butchart chollymon2002@... [sunfish_sailor] wrote:
