THANKS!!!! You all are the best! Such great advice!
What are the chances... Say I go ahead and take the sage advice offered to just split the hull and deck at the outside seam.
I'm worried that the deck is too brittle to take much bending. How realistic of a concern is that? I have some local cracking, epicenter, circular stuff, but no big long "cracks" in the gelocat.
By the way, adding a layer of fiberglass on the inside is brilliant. Saves sanding off the gelcoat...
I'll be sure to keep the group posted. Air test first. If no conclusive results, split the seams, and delicately lift the fore and aft decks and take a look. After that, mull things over! I'm sure I'll have more questions as I go along!
Thanks again Folks!? Dave
____________________________________________
"Better to light one candle than to curse the darkness"
