The instructions from RMW so far seem to be pretty good. ?I got the clutch kit from RMW, which is a Sachs kit. ?It came with the clutch, pressure plate, release bearing, pilot bearing, and the spline alignment tool. ?The pilot bearing is not needed because RMW¡¯s flywheel already has the pilot bearing installed. As I mentioned, there was no suggestion to use blue thread locker on the bolts, but I did it anyway. ?
?
I originally ordered my motor mounts from eBay but they were not the same. ?Now I can¡¯t remember where I got the ones that actually matched the originals from the Subaru. ?But they were about $60 for the pair if I recall correctly. ?
?
The one on the left was the one from eBay. ?It was listed as the same, but it was not the same size. ?It might have worked but I didn¡¯t want to chance it so I returned them.
?
?
The mounts I eventually purchased were identical to the originals. ?I will try to figure out where I purchase them. ?So many purchases!!!?
?
Warren
89 Westy?
88 Tintop
70 Westy
