On a 01 legacy manual tranny B136-15 is RB and goes to B21-12 then turns to R and then goes to E13-1 throttle position sensor and E21-3 intake manifold pressure sensor. ?Also it goes to B99-2 and then to R134 and ends at R47-3 for the fuel tank
pressure sensor. ?
B136-16 is RG and goes to B83-12 which seems like it¡¯s a shielded ground connector. ?
toggle quoted message
Show quoted text
?
Im pretty sure im looking at it correctly.
B136 is a green connector.
If looking at the back of the connector where the wires feed into the plug, the numbers run right to left.?
Im also fairly certain that these pins (b136-15, b136-16) are missing from the plug. Where do these wires go originally? Im assuming they run through either b21(e2) or b22(e3). Which wires do they connect to? Where can I route them if they need to be re
pinned? And why arent they in the original harness?
attached is a color coded ecu pinout that i made.
<2001 Legacy ECM Pinout_Page_2.jpg>
<2001 Legacy ECM Pinout_Page_1.jpg>
<2001 Legacy ECM Pinout_Page_3.jpg>
