Hi, so when I find that wire, I cut it a few inches away the connection spade into the ignition switch and join the two cut wire ends with the wire coming from my dash gauge 'I' using a twist wire nut?
toggle quoted message
Show quoted text
--- In subaruvanagon@..., Robert Stevens <mtbiker62@...> wrote:
On May 22, 2012, at 10:36 PM, davidasalyer wrote:
and 'I', which per the instructions on the kit needs 12 volts ignition on line.
I used the ignition-on wire at the ignition switch. I poked around until I found
the wire that produced voltage when the ignition key was on. That wire runs
3 aftermarket, VDO gauges on top of my dash.
List photo here:
<>
bob
