84 wesite manual transmission, ej22 -- 1990 wiring harness (automatic
transmission), 1994 engine (manual transmission). So the TPS is from
the 1990. This is a Subaru-Subaru engine swap, not a VW-Subaru swap,
so the harness was fine with the last engine. So I simply moved the
intake manifold (and all the associated wiring from the engine I was
removing) to this 94 engine, then put the engine in the van. I notice
that the TPS takes a beating on the cherry picker when I pull and
install the engine as that's where the chain rubs. I have the Haynes
troubleshooting instructions for this error, I was just wondering if
there is a conflict between the harness and the engine (I wouldn't
figure, but it doesn't hurt to ask). If it turns out I damaged the TPS
with the cherry picker, can I use the TSP from the 94 wiring harness
(are the 90-94 TPSs all the same??
Thanks,
David
