Has anyone had any issues closing the deck lid with the RMW installation kit and an EJ25 engine?
Tom
To: subaruvanagon@...
From: luke@...
Date: Wed, 2 May 2012 11:05:21 -0700
Subject: Re: [subaruvanagon] Re: 2006 EJ25 in a 91 2WD Westy with auto tranny
Just with the Kennedy engine mount it seems.
I've got an EJ25 in my syncro using the smallcar engine mount system
and the deck lid is stock.
toggle quoted message
Show quoted text
On Wed, May 2, 2012 at 10:53 AM, Tom Dueck <glen_burnie@...> wrote:
Are you guys saying that all EJ25 engines require spacers or only if you use the Kennedy adapter?
Tom
To: subaruvanagon@...
From: rangermorton1972@...
Date: Wed, 2 May 2012 10:51:47 -0700
Subject: Re: [subaruvanagon] Re: 2006 EJ25 in a 91 2WD Westy with auto tranny
Are you guys saying an EJ25 is taller than an EJ22? Where would the spacers be placed?
Craig
--- On Wed, 5/2/12, poussinnoir <huotb@...> wrote:
From: poussinnoir <huotb@...>
Subject: [subaruvanagon] Re: 2006 EJ25 in a 91 2WD Westy with auto tranny
To: subaruvanagon@...
Date: Wednesday, May 2, 2012, 12:24 PM
Spacer, no way out with KEP support.
Ben
--- In subaruvanagon@..., "Gilles Turmel" <gilles.turmel@...> wrote:
We're trying to install this engine using a KEP engine support. We can't close the engine bay lid unless we had 2 inches spacers. Is that the only solution? Also looking for a steel exhaust manifold. Any help would be appreciated.
Best regards.
[Non-text portions of this message have been removed]
------------------------------------
Yahoo! Groups Links
