Hi David..
not the last 50 times I tried jumping with a plain wire.
That just makes the LED keep flashing , in my experience.
that would be handy ...just a paperclip. But 'no worky' that I have
seen , going back for years., on vanagons.
toggle quoted message
Show quoted text
On 4/20/2012 10:59 PM, David Beierl wrote:
At 01:45 AM 4/21/2012, Scott Daniel - Turbovans wrote:
I jumper the two level sensor connectors with a resistor ....value
doesn't matter that much. 2K ohm say.
That tricks the level sensor circuit into thinking the level sensor is
happy..
Scott, you don't even have to bother with the resistor, plain wire
will do. You won't injure the circuit. Of course a quarter-watt
resistor has nice thin leads that won't damage the connector. Any
value from zero up to at least 100K should be fine.
Trivia: tying the active sensor line to *any* constant voltage will
keep it from triggering. Ground is the most convenient, of course,
and the one used on the connector.
Yours,
David
