开云体育

Sorry see the links tab.

This great web page gives all the spindle data and sizes for most metal lathes. Can help you cross referance to see if checks from one manufacture will fit your lathe.

Go to your email program and send an email to "southbendlathe@...". Attach your picture to the message using the attach function. When you send the email it will show up here with your

Iam pc haddy caped you see I can not spell eather Brett. that is way I have spell check

I use 90wt grear oil on the gears on my A model. On spindle oil is Velocete NO. 10 and NO.2 way oil. On the pully stuff I took off the oilers and made a grease fitting and grease it works great

SUre I can but it will be a few days will be gone tomorrow I will send it to you Brett ------------------------------------------------------------------------ jwtaylor61@... wrote:

Paul and I have been trading notes on the SB lubricants and their viscosity. I am curious as to what lubricants are used by folks that have had SB lathes for a while. There are four types rec by

Can you post a picture of your belt installed? CARS. ANY

I see you guys are doing the old leather belt stuff. I JUST WENT OUT TO MY AUTO PARTS STORE AND GOT A SURPTEIN BELT THAT THEY USE ON CARS. AND PRESTO NO MORE BELT PROBLEMS. IT WORKS GREAT AND ONLY

I have a 1940 (in. model a and love it. do any of you guys know why when i use the back gear it jumps out Brett

Hi, Was just informed of this group and checked in. I own a 9" South Bend tool room lathe. I all but the follower rest for it. I got the lathe and approximately $3000.00 worth of Starret, Brown

Hello everyone, my name is Roger and I live in Mesa, Az. I picked up a 50s vitage 13 inch SB and slowly fixing it up. It looks in fair shape excep it was handled poorly during a past move and the

Who uses what kinds of lubricants on their SB Lathes? A couple people have already chimed in: JS Early mentioned 30W ND oil. Tom Miller mentioned Fastenal's p/n 62642, Super Lube Synthetic Based

Tom, Wonderful story. My junior high shop teacher would barely let us touch the lathe (with good reason). I recall the only thing I got to make on the lathe was a hammer head. In high school, we got

Paul, and the other SB egroupers, Loved the web page on the 9" SB, I will try to get some pictures posted of my 13". Ok here is how I got the 13" SB 4' serial no. 91573, mfg. 3 Aug 1939 (this info is

Dean, Nice looking lathe. Could you tell me the diameter of the pulleys on the motor and at the top of the jack-shaft (the red ones)? I may need to duplicate those. Thanks Paul R. Hvidston Upland,

Paul, I have the lathe in storage. I will run over there this weekend and get that info to you, Thanks, Dean

Hi all, I hope everyone had a Merry Christmas. I have a a page dedicated to my South Bend 9" workshop lathe, there is not much there but at least you can see a couple of pics of another lathe. Also,

Bill From the information I have the 10K is the light 10 and virtually the same as the 9" A in most specifications. The heavy 10 has a larger spindle bore for 5C collets and a 2 1/4-8 spindle nose

Can anyone furnish specs. for the 10K lathe? I am looking for a 9"/10" w/the 1 3/8" (or larger) spindle bore & have come across a few 10K's. Also source for parts list & drawings for the same lathe.