开云体育

Apologies, this has gone completely OT. My interest in gluelam arrived 24 years ago with my wife, who does architectural drawings, the pretty ones for selling to planners and customers. A lot of

BTW if anyone wants it as an Alibre AD_PRT file of this I can send that. John Sent: December 29, 2023 12:12 AM To: [email protected] Subject: Re: [SouthBendLathe] Taper Cover Heavy

John, Many thanks! Have been following the messages, and my 10L doesn't have that cover either. Info is much appreciated. Cheers, and a Very Happy New Year to you and all the other

Thank you, VERY much!?? Bill in OKC William R. Meyers, MSgt, USAF(Ret.) Aphorisms to live by:Good judgement comes from experience. Experience comes from bad judgement.?SEMPER GUMBY! Improvise,

Considering how long my "drawing" skills have been mouldering, that could be a very kind thing! Not to mention my mathematical difficulties. ;) Bill in OKC William R. Meyers, MSgt, USAF(Ret.)

Here we go. Dimples are now 0.125” out the bottom and 1.25” apart centered on the hole. Sent: December 28, 2023 8:12 PM To: [email protected] Subject: [SouthBendLathe] Taper Cover

Missing is the distance from the center hole to the dimples. But otherwise here it is as a step drawing exported in millimeters since most of my 3D printing is in millimeters. I could make the

here's a better pic with dimensions for the Alignment Indentations,which I missed on the 1st try.? Specs are from my Heavy.? The indentationsare 5/8" center to center of the hole.?(looks like

here ya off.? straight off my 10L, dob 9-6-68.....

Awesome! Sent: December 28, 2023 6:50 PM To: [email protected] Subject: Re: [SouthBendLathe] Cover for Cross Slide and/or Ways I can get you a drawing form an oem piece from a Heavy

I can get you a drawing form an oem piece from a Heavy 10 as I have 1 in the garage

MY wife had a 63 dart convertible with a slant & push button , I could actually chirp the tires on that car . animal

Jim V posted a link for this guys tiny flame engine . I spent some time last nite watching some other tubes by the same fella . This guy has done some pretty cool projects . Even a knob for a guitar

Tears ago they came out with these wooden I-beams . They have perforations the full length? every maybe 16" that ya can pop out with a hammer for wires or pipes . Ya can make just about any size hole

Wow! I had no idea -- wish I could visit it. What kind of glue was used in that structure? Must have had significant influence on longevity :) (I've also been a fan of the Norwegian "stave churches"

bada bing , bada boom animal

Hey Bill, Looking forward to seeing a scaled drawing for a Heavy 10L John Sent: December 28, 2023 2:32 PM To: [email protected] Subject: Re: [SouthBendLathe] Cover for Cross Slide and/or

I don't have a 13 or a 9A, but I may be able to scale it for a Heavy 10L, too... ;) Thank you for sharing this info! Bill in OKC William R. Meyers, MSgt, USAF(Ret.) Aphorisms to live by:Good

This is an original from my SB 13". Scaling one for a SB9 would be easy.

Lou, if you're interested in Glue Laminated wood, are you familiar with Manchester Oxford road station? See https://en.wikipedia.org/wiki/Manchester_Oxford_Road_railway_station Eddie