开云体育

some of ya folks may be interested in these , not mine I just stumbled on them https://www.ebay.com/itm/126492663906? animal

No plate on my under mount, only a lube plate on the outside of the gear cover. Dave, do you still need help? I can go count my gears if needed. Payson.

It could be that it actually has a metric lead screw and gear box. In that case cutting inch threads is much like cutting metric threads on an inch lathe and cross slide and compound will be in mm.,

Should be a plate inside of the gear cover . animal

20 or 40 on headstock stud, 56 tooth on gearbox, 80 tooth idler on banjo. [email protected]> wrote: -- "well, I stand up next to a mountain- and I chop it down with the edge of my hand"

I’m picking up a 1980s vintage 10k with quick change. The end gears have been set up for metric. Is there a schematic for setting it up standard setting again. I have gears that came with it but

No idea, Eddie. Maybe someone else might have the answer. Best Regards, Andrei mailto:calciu1@... ________________________________ Sent: Saturday, June 8, 2024 4:13 PM To:

Correct me if I'm wrong, but aren't the bearing caps line bored with an individual headstock and therefore a major undertaking to match to another? ? Eddie ?

Ok guys, I am back home. Had a full day of work at one of my rental units. Here are the pictures. If you want more detail, I can take several additional pics of each item. There is no minimum price.

Andrei . This seems to be an interesting proposal, diminished greatly, by a lack of descriptions/photographs, etc... . Is this a pile of bolts? possibly a pristine lathe bed with intact factory

Get the camera working! Yahoo Mail: Search, Organize, Conquer

Looking forward to pics! Nick

I've got a 10L down in the basement. What do you have?

Maybe. Guess it all depends on what you have there. Will be looking for the pics!! Greg [email protected]> wrote:

My girlfriend's dad bought a lathe to restore. He thought it was a 10L. In my desire to score brownie points with him, i bought a bunch of parts to help him with his project. Turns out his lathe was

I sold one @ a year back for 325.00? for a 9" lathe animal

Sorry for the delay guys!? I have a water damaged wall in my basement so I have had to move some machines and a large portion of my shop to accommodate the contractors.? It was when I was packing

Got any pictures? I might be interested in it as well, I was just thinking of building one a few weeks ago. Nick

hey Jack. I will take it. would you take 200 for it?

I have a Heavy 10 milling attachment I don't use.? It is in excellent condition maybe used a couple of times.? If I remember correctly the South Bend sticker is still on it.? I have only a vague