Re: Grizzly Mill DRO Questions
|
Glass scales are 50 bucks on Amazon. I think we can all afford to screw up that much money.
Get
toggle quoted message
Show quoted text
I somewhat get the feeling that Dale has a much better operating budget that myself .
animal
On 11/20/23 9:00 AM, ww_big_al wrote:
Try it at your own risk, but here is a video Showing Dale using a chop saw.
Al-USA
?
?
?
?
?
Great. Thanks. I was envisioning a diamond wheel on a dremel.
It's been 3 years, but I believe I scored it with a diamond file and snapped it on a sharp edge. Could have used a glass cutter. Might have used a Dremel with a diamond cut-off wheel sold at Harbor Freight.
On 11/20/2023 1:29 AM, Andrei wrote:
How did you cut the glass scales?
I have the Clausing version. Buy scales that are longer than the travel
distance for each direction. The scales can be shortened (even glass
scales). I bought a Chicom kit sold on Ebay by 200 different sellers.
The scales were glass. It took some time to disassemble the scales and
cut them, but it was not that hard to do. I did not use the included
mounting hardware preferring to make my own for a better fit. It has
been 3 years since the install and it works great. If you buy one, I can
send you a manual that I found online, which is much better than the one
written by the slave laborer for my kit.
On 11/18/2023 11:13 PM, mike allen wrote:
> ??? any of you folks have one of these Mills , their sold buy all the
> usual suspects .
>
>
>
> gclid=Cj0KCQiA3uGqBhDdARIsAFeJ5r1mMqXY7Zk9br2zA8mAP0Wjrc-a8bLVekjt8w3n-tcupz8j6lkcCc8aAhkhEALw_wcB
>
>
>
>
>
>
> ??? I'm looking to see if anyone has put a DRO on one of these & what
> length scales they got with the DRO
>
> ??? thanks
>
> ??? animal
>
>
>
>
>
>
?
|
