Re: First lathe rebuild questions
|
Here is my copy I have in my folder. Maybe it is better. This was from someone else posted here. ? ?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of Andrei Sent: Wednesday, July 26, 2023 12:06 AM To: [email protected]Subject: Re: [SouthBendLathe] First lathe rebuild questions ? Could not read the label. Too fuzzy. Can you share the link to the original image?
yea , that's? it , that's the ticket ! animal On 7/25/23 7:22 PM, Bob Kellermann via groups.io wrote: 
? Join up over here , they have a SOuth Bend lathe specific form . In either the Sticky topic or the one below it for links should have a picture of the label of a can of paint mixed up at Sherwin Williams . The whole paint recipe is on the label in the pic . I used it when I redid my 9A . Great paint I went to a art store & bought some real good paint brushes to use & the paint is self leveling . I made the mistake of putting mine back together after a couple of days . When & if I ever decide to do it again I'll let it sit & harden for a couple of weeks . If you can't find the pic just ask & someone will pipe up with the info of where it's at . Great forum probably a couple thousand years of South Bend lathe experience there . good luck , & remember pictures or it never happened . animal ? On 7/25/23 2:50 PM, Jefferson wrote: I just bought my first lathe (9" 744 A 167045) and I have some questions. It is covered with surface rust, and the motor has been disconnected.
1) Does anyone have a wiring diagram to connect the motor (GE 5kc63ab776) to the barrel switch and a power cord?
2) Is the ILION rebuild kit and "Guide to Renovating" (Amazon $80) the way I should proceed?
3) What gray (It was originally gray right?) brush-able paint would you recommend?
Thanks in advance,
|
ww_big_al
