yea , that's? it , that's the ticket !
animal
On 7/25/23 7:22 PM, Bob Kellermann via
groups.io wrote:
toggle quoted message
Show quoted text
?
Join up over here , they have a SOuth Bend lathe specific
form . In either the Sticky topic or the one below it for
links should have a picture of the label of a can of paint
mixed up at Sherwin Williams . The whole paint recipe is on
the label in the pic . I used it when I redid my 9A . Great
paint I went to a art store & bought some real good
paint brushes to use & the paint is self leveling . I
made the mistake of putting mine back together after a
couple of days . When & if I ever decide to do it again
I'll let it sit & harden for a couple of weeks . If you
can't find the pic just ask & someone will pipe up with
the info of where it's at . Great forum probably a couple
thousand years of South Bend lathe experience there .
good luck , & remember pictures or it never happened .
animal
On 7/25/23 2:50 PM, Jefferson
wrote:
I just bought my first lathe (9" 744 A 167045) and I have
some questions. It is covered with surface rust, and the
motor has been disconnected.
1) Does anyone have a wiring diagram to connect the motor
(GE 5kc63ab776) to the barrel switch and a power cord?
2) Is the ILION rebuild kit and "Guide to Renovating"
(Amazon $80) the way I should proceed?
3) What gray (It was originally gray right?) brush-able
paint would you recommend?
Thanks in advance,
