??? ??? Yep , that makes sense , right now I? don't have a
reversing switch on my treadmill motor . That's on top of my more
important sh** to do list . I'd also like to get a reverse tumbler
off a 10" lathe so you don't have to use a wrench to reverse the
lead screw .? But geeze people think those things are made out of
gold ! I'm not a miner . Ive got a bunch of experimenting when I
get my lathe moved over to the new shop .
??? ??? thanks
??? ??? animal
On 2/15/2023 4:06 PM, Nick Jonkman
wrote:
toggle quoted message
Show quoted text
I also power reverse the spindle.
Nick
On 2023-02-15 1:13 p.m., Andrei
wrote:
I think you got
it right, with one caveat: Abom79 was power reversing the
spindle
On 2/15/2023 10:03 AM, mike a
wrote:
??? ??? ??? I believe if you have a hand crank on the
outboard spindle it will work , but I will not be able to
test that theory for a couple 3 weeks. Hit return too fast
.
??? ??? My thought is to
??? ??? 1 . Make your pass
??? ??? 2. Back the tool out .????
??? ??? 3. Power the lathe off leaving the halfnut engaged
.
?? ???? 4 . Use the hand crank to move the carriage to
original starting point? .
??? ??? 5. Rinse , repeat .
??? ??? but I could also just be pounding sand
??? ??? animal
On 2/15/2023 9:18 AM, m.
allan noah wrote:
Too bad it isn't true.
allan
