Strange. I use PuTTY on serial ports all the time.
Last option on the connection line is "Serial", then select the relevant/equipped serial port and normal serial parameters 9600/8/1/N etc.
toggle quoted message
Show quoted text
On 04/30/2022 2:42 PM SlickRCBD <slickrcbdalerts@...> wrote:
This might help, but I haven't tried. I know Putty won't help since it
only works over TCP/IP, not the serial ports (or a serial->usb
conversion). I do recommend Putty for SSH connections. Much easier than
Microsith's inadequate command-line tool. It's about as basic as the
telnet and FTP commands.