¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. SabreSailboat
  2. Topics

seacock missing handle under sink

 

Thank you so much.? Gary
 

Thank you so much? ? Gary
 

Thanks a lot?
 

Handle should be on the other side. If it¡¯s missing you can put a crescent wrench over the tab that the handle attaches to - not the nuts in the picture.? Replacement handles are available from Spartan.?

Dave Castor?
Port Angeles, Wash
1986 S32

On Thu, May 8, 2025 at 5:02?AM Gary Weiser via <gaweiser2=[email protected]> wrote:
Hi
Under the? sink in my sabre 32. 1986 , I found a seacock that I think? is missing a handle .? ? ?Can I still check to see if it is functioning by moving the outer nut with a wrench? or would it be better to buy a handle for it.? ?At this point the boat is going to be launched soon and I'm not going to replace the seacock although maybe that is the best solution.? ?Not sure what brand this is.? ??
?
Thank you.??
?
Gary W?
sabre 32?
 

¿ªÔÆÌåÓý

Here¡¯s one of the ?link¡¯s: you can also ¡°borrow a handle from another seacock. ?They are replaceable but I service 5 years ago and have operated annually and they are still very much smooth and easy to close. There are options to replace in a recent post and some firmly believe that¡¯s there most important replacement. Not yet high on my list.?



Stephanie
Arista, S36 #67, Lake Ontario?
Shburgess1207@...?

--
Stephanie
Moderator

Sabre 36, #67
Formerly Sabre 28-2, #289
Wilson Harbor, NY Lake Ontario

 

¿ªÔÆÌåÓý

Spartan seacocks, standard issue. The handle would be on the opposite side from the nuts. To service, follow procedure on Maine how to or the Spartan website.
Len Bertaux
Walkabout S38mkii
Prides crossing MA

On May 8, 2025, at 8:02?AM, Gary Weiser via groups.io <gaweiser2@...> wrote:

?
Hi
Under the? sink in my sabre 32. 1986 , I found a seacock that I think? is missing a handle .? ? ?Can I still check to see if it is functioning by moving the outer nut with a wrench? or would it be better to buy a handle for it.? ?At this point the boat is going to be launched soon and I'm not going to replace the seacock although maybe that is the best solution.? ?Not sure what brand this is.? ??
?
Thank you.??
?
Gary W?
sabre 32?
<IMG_4301.jpg>

 

Hi
Under the? sink in my sabre 32. 1986 , I found a seacock that I think? is missing a handle .? ? ?Can I still check to see if it is functioning by moving the outer nut with a wrench? or would it be better to buy a handle for it.? ?At this point the boat is going to be launched soon and I'm not going to replace the seacock although maybe that is the best solution.? ?Not sure what brand this is.? ??
?
Thank you.??
?
Gary W?
sabre 32?

IMG_4301.jpg

1 - 7 of 7