开云体育

Hello all, I looked for these answers, but was unable to find them in the archives. 1) what are the volumes of the two water tanks in a S362? 2) does everyone use a j-hook on their mast?? My rigger

Nate, if you're low on options for a 28 (which it seems you are not), contact me off list at elizabeth.rhodes@.... My boat is in Boston. good luck with the search!

Nate, My S28 is available in Mattapoisett for $5K.She has new main and jib and my sailmaker just put new windows in the dodger.Perkinsyachts@...

I found water and holding tank gaskets at my local hardware store. They are a 3-1/2" i.d. what I didn't realize was pump out, water, and fuel are all different sizes. *Christopher M. Evans* Mobile:

The seacocks that are in the aft lazarette are only for the deck and cockpit scuppers. If you have overboard discharge, that seacock should be accessible via an access port in the shower. You then

I may be remembering incorrectly, but I believe that the starboard cockpit drain connects to the seacock for the port drain. Still not great, but easier than getting over to the exhaust and autopilot

On both sides, you have to crawl into the lazarette. Not something you'd want to do in an emergency.

We purchased a Sabre 402 and are still familiarizing ourselves with it. Can someone help explain how to access the seacocks in the stern of the boat. They seem to be located under the propane locker

I go with the approach Larry Davis suggested.? Also someone on here suggested (remove the pump) using a flex head rathering wrench - works a treat.

Looking at boats in the 15k ballpark. Thanks to the members who have forwarded me leads and info off-group. Thanks, Nate -- Nate CapeDory 22 Bar Harbor Yacht Club

Paul, As you can tell from the replies, this is not an easy task. I highly recommend replacing with an impeller from Globe. They are made from a different material and last much longer. I only replace

Garhauer makes add-ons to attach to your stanchions to store kayaks. Shop | Garhauer ( https://www.garhauermarine.com/shop/?_categories=kayak-racks ) Tim R 38MKII in refit

I suggest using RG213 - I have used this on my last boat and installing into my 38. I would be up in Georgian Bay and get clear signals from Port Huron. I used pool noodles in the bottom half of my

I changed the head joker valve and deep cleaned the head area, pumping the floor rinse water through the shower sump. The pump threw water violently out of the sink drain. The under-sink plumbing is a

Nice looking boat Kevin. Allison Lehman Swiftsure Yachts allison@... Cell: 510.912.5800 Fax: 510.860.4640 ?

And back at you, Radiance! -- Liz Baylis San Rafael, California S/V Acquaviva Sabre 425 hull #83 Bristol, Rhode Island

For what it’s worth, the water pump on my 35 C in my 2002 Sabre 362 faces forward and is just as easy to service as the Beta. I don’t know what else might be different between the 35 C and B, but

Good morning Nathaniel, our Sabre 28 is currently listed on Boats.com and Sailboatlistings.com. I tried to PM you but I got an undeliverable notice for some reason. You can email me and I would send

What is your price range? -- Piotr Serwik S28 Mk I (standing rigging from Mk II). 1972, Hull #13 "Deep Blew" Rock Hall, MD

Rhode River is a nice anchorage. Stayed there a couple of days last October. The Smithsonian Environmental Center is there and an interesting project. Nice trails to stretch your legs on. Dave Second