开云体育

Hi Foster, yes, after I compared the price of the new model and the service kit, counted my time toward another project, and factored the likely chance of lasting and durable success, I realized it's

The threads on sink faucets are 1/2" straight, not tapered. Most single piece hose barb adapters are 1/2 " NPT, i.e. tapered. They will screw together but Teflon tape will not prevent the threads from

From my experience trying to rebuild my older foot pumps I would just replace it.? I bought rebuilt kits for 2 of them and do to the age of the plastic (being brittle) they housings broke almost

Happy spring everyone. Trying to fix a couple of small leaks I have at the sink and shower fixtures under the head/vanity counter.? Is there a trick to getting these to stop dripping?? I cutoff a

I have the same issue on my 362 and haven’t figured out the fix. I emailed Glen at Sabre a few years back and he wasn’t able to help. It almost seems that the bolt is installed into the bulk head?

Hi David, How are you? ?I think you surveyed my boat about 3 years ago. I just painted my bottom yesterday and used one gallon. ?I use Micron CSC. ?Most seasons I can get pretty good coverage with

Similar situation on my 28-1. Advice please. Ted Brumleve Louisville, KY Sweet Pea [email protected]> wrote:

One of the flat head screws on a stanchion base on our 362 is loose/able to be turned and there is a bit of rust weep coming from under the base. It is the inboard aft screw of the forward stanchion

Although not a Sabre any more, with our S 402 still sitting in the Bahamas , where she became a TCL in Hurricane Dorian on the 1st September 2019 , I still sail our Catalina 42 Mk 2 on Lake Ontario at

Hope you have many new adventures with your new boat. Best. -- Foster 1987 Sabre 42 C/B Hull #17

Thanks all. Bells and whistles on this project for sure. Figured am doing this once, so as a friend says, if you are doing something might as well overdo it. Thanks Dave for a contact name at PKYS.

Friend in my harbor was still sailing his 362 at 93. Not single hand.

To all you 80ish singlehanders, please know how happy you made me and probably many others to see that's possible. I'm 66 and most of my sailing is singlehanded, and it's just great to learn that

Brian, You’ll have a solid system. A couple of comments. Getting packages shipped out of Annapolis seems to be problematic. PKYS has been great at getting them out the door in a timely manner,

Len we have the GXtouch 50 (the predecessor to the Ekranos) and it is rock solid

Brian, It sounds like you are on the right track. I'm sure you will enjoy the benefits, once the hemorraging ends! Allison Lehman Swiftsure Yachts allison@... Cell: 510.912.5800 Fax:

Brian I understand your budgetary pain! One more heads up, the VE direct connector on my Ekrano display are problematic as they don’t have a secure connection and are prone to come out. Leaving your

Good choices across the board! Jim Starkey [email protected]> wrote:

Thanks Allison, Jim and Dave. In large part to you, Len B, Pete W, Jordan and many others who have blazed this charging upgrade and LFP change trail [add in too many hours on YouTube watching

Earlier this winter I had some work done on Second Star. In the process the tech managed to damage the temp sensor on the alternator. In just a few hours of motoring the temp sensor broke off the