开云体育

Rob's reference to Coosa ( https://coosacomposites.com/bluewater-panels/ ) composite panels as an alternative to wood or G10 piqued my interest in learning more about Coosa and their products. I

Great Doug, thank you. I'm ordering a 20KG Vulcan today! -- Triona Sabre 362 #132 Sachems' Head Ct

No interreferences, and an excellent performing anchor.? It just requires some planning to remove the cross pin.? See the photos below of my setup.? I also have a 22lb Lewmar claw anchor on 5/16

The Vulcan doesn’t sit as neatly on a roller as some other anchors. ?See pictures in the message below. /g/SabreSailboat/message/99737 -- Jeff B 1988 Sabre 34-2, 347 S/V

My last boat was a Pearson 28 that had suffered galvanic corrosion on the bottom of the mast. The previous owner had the bottom of the mast cut and a metal step installed in its place. Looked

I've been hoping to get the mast step rebuilt this spring, but time is just not on my side, so I've been in talks with my yard to do the work. ?They have looked at the issue a few times and recommend

Oh boy, the pain begins…. Folks, you may want to stock up a little bit on key items to keep the boat operational based on part availability alone. Get Outlook for

Well it seems the Spade distributor is out of stock on the Spade 100, and with the Tariffs he's not sure when if ever he would have them. He mentioned the supplier expects 104% on the next

Hello, Update on this thread. I talked to Glen at Sabre and he said they originally used Nautilus Marine Fabrication in Maine to make all the chainplates. Contacted Nautilus and they said they can

I have a 20kg Ronca Vulcan on our S362 with 50ft of 3/8 chain and 200ft of triple braid.? I love the? anchor holding and (almost) never worry about it, but the storage on the bow roller is not

mixed or mixed up?

I’m a big fan of spade. I’ve had a 33lb (80?) model on my 34 for years. Held the boat in 40 knot winds. 40 ft 5/16 chain and 300 ft line. Had some corrosion problems after about 7 years and the

Not sure if you mean my repair Aaron but that is 1/4” teak and Holly ply. I added a stencil hand painted with the compass rose. Then sealed with epoxy and Varnish. -- Stephanie Moderator Sabre 36,

Here are a couple of more angles for your convienance [IMG_6613.jpeg][IMG_6606.jpeg] Randy Drummond S/V Dazzle S38mk2 206 Miami

Probably so. I don’t remember where this one came from but I know I didn’t have to look far. I experimented with a couple to see which did the best job and this one won. Randy Drummond S/V Dazzle

looks like one of the many rollers available from trailer parts suppliers

Yes the roller was off the shelf and I just made a cardboard pattern for cutting the aluminum. Randy Drummond S/V Dazzle S38mk2 206 Miami

Please do. I’m very happy with the results. 1/4’ anodized aluminum plate from mcmaster Carr and three bolts. Randy Drummond S/V Dazzle S38mk2 206 Miami

Randy I like it! We have the same thing going on with our Rocna and the Harken drum. Was that an off the shelf roller? Len Walkabout S38mkii

nice - I might just have to copy that