开云体育

Hi Tim, Sounds like a good schedule. But I wonder if it's better to have the washer conform to the glass surface rather than crush the glass to conform to the washer. Glass loses it's strength when

This is what is in the bilge of my 1997 362.? Pretty sure this is OEM.? Working from memory, I think these are at least 1/4" thick

n 2023, I left a tri-radial spinnaker and storm trysail on consignment at Bacon Sails in Annapolis. From previous owner, both of these were for? our 38MKII, we used the spinnaker a couple of times,

Velcro Beach is not an autocorrect, it is a nickname for Vero Beach amongst cruisers. The municipal marina has an excellent mooring field well protected from all winds and seas. It is used as a

The timing has to do with the renewal date and when the last survey was conducted. They wanted surveys within the last 5 years for boats over 30 years old. My renewal date is in October. Second Star

A timely tip, so I thank you for that Dave. I received my email from Geico earlier this year and a reminder yesterday. Not sure how they do the math on calculating age, I’ve had the boat insured

There is a thread on this topic for S402s from Feb ‘21. I ended up going w Spinlock and coring, glassing, drilling and bedding 2 new deck organizers. I had to remove the ceiling strips but not the

Back in 2023, I put on all new SS washers and SS nuts for my keel bolts, and since then my boat has been only in fresh water. ?What I found out less than two years later, is that my washers are

Hi Dave, Glad it worked out. Hopefully you can get unstuck from “Velcro Beach” and get over to the Bahamas. I hate autocorrect. Bill Kellner S32 Sandusky Ohio [email protected]> wrote:

Hi Dave, It is sad to read your dealings with Geico but not too surprising - true, loyalty helps but only so much, we are just a number on a file, I think what may have helped is your threat to

I did a little research online and it appears the impellers are slightly different - the 48500 kit impeller has a slightly larger inside diameter (0.7 mm). The drawing didn't give the diameter of the

We all like bashing insurance companies, or so it seems and for 41 years I’ve not had any complaint about BoatUS insurance, until this week. In the end, everything worked out, the process just

This, along with white electrical tape, has worked for me! Dave Gerhardt Serenade S 34-1 #184 NB, Canada

Hello, What color is it? Do you happen to have a photo? thanks -- Mike S/V Summer Place S402 #77 San Diego

I used to have a 27A and had replaced the water pump, If needed, a new style pin can be put into an old style impeller. ?The new style pin is a smaller diameter, but the brass ring threads are the

I'll be in Middleboro tomorrow and will mail it from there. I do get to Hadley on occasion. ?Didn't get there last season, hopefully this season. Boat's currently in Mattapoisett in the Brownell

Great! Let me know the cost and I will shoot you oat a check. Maybe we will bump into each other on the water at some point. Do you visit Hadley often? Thanks John G Sent: Wednesday, March 19, 2025

And you are right. Found that out the very hard way.

I'm getting ready to replace my mast boot and was wondering if anyone had some recommendations? Thanks, -- Steve Myers Wind Dancer 1984 Sabre 34-1, #232

That could be. I’ll check next time I’m on the boat. Dave [email protected]> wrote: